RE: [Snort-users] Cant see alert for rule

Interesting...
My laptop (snortbox) is using a 100MB NIC

My two other boxes are using the Intel 10/100/1000 NIC

Since the little Linksys 10/100 5-port workgroup hub is in the middle,
shouldn't it all level out to 100MB?

If not, what can I do? This is a lab so no prob switching things =
around...

Should I pull the laptop out of the equation and just run the two Intel
10/100/1000 NICs? (install Snort on the attacker? But if I do that, =
will I
just end up with the same problem?

thanks

-----Original Message-----
From: snort-users-admin@lists.sourceforge.net
[mailto:snort-users-admin@lists.sourceforge.net] On Behalf Of Jeff =
Coppock
Sent: Wednesday, June 02, 2004 2:20 PM
To: snort-users@lists.sourceforge.net
Subject: Re: [Snort-users] Cant see alert for rule


On Wed, 2 Jun 2004 13:37:04 -0700
"Tom Fulton" <tfulton9909@comcast.net> wrote:

> I pulled out my Linksys switch and put in an old 10/100 5-port=20
> workgroup hub. Same problem.
> =20
> Any one have any ideas?

10/100 hubs actually have a switch between the 10Mbps segment and the
100Mbps segment to provide connectivity between them. So, if the snort =
box
is on a different speed link than the other PC's, the snort box will =
still
not see any of the traffic between the other two PC's.

jc


--=20
Jeff Coppock Systems Engineer
Diggin' Debian Admin and User


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and =
evaluate
today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Snort-users mailing list
Snort-users@lists.sourceforge.net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/...fo/snort-users
Snort-users list archive:
http://www.geocrawler.com/redir-sf.p...=3Dsnort-users



-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504
_______________________________________________
Snort-users mailing list
Snort-users@lists.sourceforge.net
Go to this URL to change user options or unsubscribe:
https://lists.sourceforge.net/lists/...fo/snort-users
Snort-users list archive:
http://www.geocrawler.com/redir-sf.p...st=snort-users