Re: sendtrap: Howto send SNMPv1 trap with trap description from SMIv2

2008/5/9 Andreas Mauderer <andreas@multenet.com>:
> I want to send this trap, decribed in a SMIv2 MIB, as SNMPv1 trap:
>
> upsTrapAlarmEntryAdded NOTIFICATION-TYPE
> OBJECTS { upsAlarmId, upsAlarmDescr }
> STATUS current
> DESCRIPTION
> "This trap is sent each time an alarm is inserted into
> to the alarm table. It is sent on the insertion of
> all alarms except for upsAlarmOnBattery and
> upsAlarmTestInProgress."
> ::= { upsTraps 3 }
>
> As SNMPv2 trap it works fine with this line:
> snmptrap -v 2c -c public 192.168.3.37 "" .1.3.6.1.2.1.33.2.3
>
> But I don't know, how to send a SNMPv1 trap. Which Enterprise OID should
> I choose?

.1.3.6.1.2.1.33.2 (i.e. upsTraps)

The generic trap value should be 6,
and the specific trap value should be 3

It would actually have been better if the UPS-MIB had defined these
traps to have the OID .1.3.6.1.2.1.33.2.0.{1,2,3,4}
But it's too late now - that's their mistake, and you can't fix it.


Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757...un.com/javaone
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users