Re: End of MIB

2008/5/8 Sathasivam, Elayaraja <elayaraja.sathasivam@capgemini.com>:
> $cat /etc/snmp/snmpd.conf'

Stripping out all the comments leaves:


> com2sec notConfigUser default public
> group notConfigGroup v1 notConfigUser
> group notConfigGroup v2c notConfigUser
> view systemview included .1.3.6.1.2.1.1
> view systemview included .1.3.6.1.2.1.25.1.1
> access notConfigGroup "" any noauth exact systemview none none

> syslocation Unknown (edit /etc/snmp/snmpd.conf)
> syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)

> rocommunity public




The first block sets up access to the "systemview" (system + hrSystem)
for the community public.
Which is exactly what you are seeing.

The final line tries to set up another access setting for public, but
this will be ignored, because you've already got settings for public.

Try replacing this file with one that *just* contains "rocommunity public"
and you should be fine.

Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757...un.com/javaone
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users