AgentX agent not sending traps (was RE: Enterprise trap

This is a discussion on AgentX agent not sending traps (was RE: Enterprise trap within the SNMP Users forums, part of the Networking and Network Related category; Happy New Year, everyone! I didn't see any responses to this issue over the last 2 weeks, and I'...


Go Back   Usenet Forums > Networking and Network Related > SNMP Users

FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1 (permalink)  
Old 01-02-2008
McGowen, Wendy
 
Posts: n/a
Default AgentX agent not sending traps (was RE: Enterprise trap

Happy New Year, everyone! I didn't see any responses to this issue over
the last 2 weeks, and I'm still stuck on this problem.

Basically, I am unable to generate any traps from my AgentX agent - I
know from my debug output that my code is being triggered, and I'm
calling the SNMP API to send the trap accordingly, but nothing happens.
The 30-second "built in" heartbeat code (the example) is working just
fine, so I know that traps are being sent and received - i.e. the
destination is set up correctly in the configuration files. (My earlier
response has some of the details.)

So is there a known issue with AgentX and traps? Do I need to configure
the AgentX agent in some special way to get the traps to work? Or is it
more likely something in the way I've defined the trap itself? I used
mib2c to create the actual "trap" code, so it should be correct, as far
as SNMP is concerned.

Here's the trap stuff from my MIB:

pivot3 OBJECT IDENTIFIER ::= { enterprises 25148 }

pvt3System MODULE-IDENTITY
LAST-UPDATED "200712060000Z"
DESCRIPTION "MIB for all Pivot3 databank objects"
REVISION "200712060000Z"
DESCRIPTION "First revision"
::= { pivot3 1 }

pvt3SysTraps OBJECT IDENTIFIER ::= { pvt3System 3 }

pvt3DatabankDriveStateFailed NOTIFICATION-TYPE
OBJECTS { name,
slot }
STATUS current
DESCRIPTION "This trap is sent when the state of a drive in
a databank has changed to FAILED."
::= { pvt3SysTraps 7 }

Thanks in advance for any advice - I'm really at my wits end here! As an
experiment later today, I'm going to try to build the 30-second
heartbeat sample trap code as an AgentX agent, and try running that - if
I don't see those traps, then I guess it will confirm my suspicion that
my problem has to do with the fact that I'm trying to send a trap from
an AgentX agent, instead of the main SNMP process. The problem is, I
have to compile my stuff separately from SNMP; I can't add the overhead
of building the entire SNMP product into our build process.

~ Wendy

-----Original Message-----
From: net-snmp-users-bounces@lists.sourceforge.net
[mailto:net-snmp-users-bounces@lists.sourceforge.net] On Behalf Of
McGowen, Wendy
Sent: Friday, December 14, 2007 2:55 PM
To: net-snmp-users@lists.sourceforge.net
Subject: RE: Enterprise trap question/send_v2trap API call

This is what I have in snmpd.conf:

trapcommunity public
trap2sink localhost public 162
trap2sink 10.1.5.2 public 162
trap2sink 10.2.5.2 public 162
trap2sink 10.1.5.5 public 162

<I don't think the port numbers are necessary anymore . . .>

I'm running snmptrapd on 10.1.5.5, and it is seeing the heartbeat traps
that are being generated by the version of snmpd that I rebuilt this
afternoon (configuration: --with-mib-modules="examples/notification").
But when the same system generates one of my traps, nothing gets sent to
10.1.5.5 (and based on my debug output, I know I'm at least calling
send_v2trap).

I'm beginning to wonder if it's something more to do with the fact that
I'm using AgentX. I turned on the debug in snmpd (the token "traps"),
and I don't see anything logged from netsnmp_send_traps when my trap
code is executed; however, I do see the debug output from the 30 second
"heartbeat" trap. Is there some initialization that needs to be done
before calling send_v2trap if the call is coming from an AgentX agent?

Thanks!

~ wendy

-----Original Message-----
From: Mike Ayers [mailto:mike_ayers@tvworks.com]
Sent: Friday, December 14, 2007 2:11 PM
To: McGowen, Wendy; net-snmp-users@lists.sourceforge.net
Subject: RE: Enterprise trap question/send_v2trap API call

> From: net-snmp-users-bounces@lists.sourceforge.net
> [mailto:net-snmp-users-bounces@lists.sourceforge.net] On
> Behalf Of McGowen, Wendy
> Sent: Friday, December 14, 2007 12:04 PM


> Maybe I'm just not seeing the obvious, either in my code or in my MIB,
> but I don't understand why my trap isn't being sent. Any
> assistance will
> be greatly appreciated!


How have you configured your destination?


Thanks,

Mike

------------------------------------------------------------------------
-
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216...sf.net/marketp
lace
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users
Reply With Quote
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 08:20 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0