RE: Timeout: No Response from localhost.

I afraid it didn't happen to me, just to a friend, so I added that as another item to try.

Merry Christmas!

Ed


-----Original Message-----
From: dave.shield@googlemail.com [mailto:dave.shield@googlemail.com] On Behalf Of Dave Shield
Sent: Friday, December 21, 2007 3:42 PM
To: Kuczynski, Edward
Cc: Smith_Randy@emc.com; net-snmp-users@lists.sourceforge.net
Subject: Re: Timeout: No Response from localhost.

On 21/12/2007, Kuczynski, Edward <edk@ll.mit.edu> wrote:
> We ran into a problem having both readonly and r/w in the conf file for v2.
> It wouldn't hurt to comment out the r/w and try again.

Would you care to expand on the problem you were seeing?

The usual issue with rw/ro clashes is when you have the
same community (or SNMPv3 user) for both ro and rw.
In that situation, it tends to be SET requests that fail
(when the read-only configuration is applied first).

I've never come across a situation where having both
rw and ro settings would block GET requests.

Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users