Re: Problems with Monitor

David:

I see that spacing is very important. Putting a space between the != and the 0 fixed this. This will only send out a Trap when the event fails, is that correct. What I also need is a notification when the triggering event is corrected.

James Mckenzie


-----Original Message-----
>From: Dave Shield <D.T.Shield@csc.liv.ac.uk>
>Sent: Oct 12, 2006 9:30 AM
>To: James Mckenzie <jjmckenzie51@earthlink.net>
>Cc: net-snmp-users <net-snmp-users@lists.sourceforge.net>
>Subject: Re: Problems with Monitor
>
>On 11/10/06, James Mckenzie <jjmckenzie51@earthlink.net> wrote:
>> >Also try running "snmpwalk ... extTable" while this is running, so we
>> >can see what these values actually are in between the various probes
>> >of the DisMan monitor.
>> >
>> Done. Files attached.
>
>A couple of things that I noticed from your output file:
>----
>disman:event:trigger:monitor: Running trigger (status table)
>disman:event:trigger:fire: Firing initial existence test:
>UCD-SNMP-MIB::extResult.1 (present)
>disman:event:fire: Event fired (snmpd.conf, TestDn)
>disman:event:fire: Firing notification event
>----
>
>So this *does* seem to be firing the notification event - at least once.
>
>The other thing that may be relevant:
>
>-----------
>disman:event:conf: Parsing disman monitor config
> (-u me -e 'TestDn' -r 60 -o extNames -o extOutput "status table"
>extResult !=0)
>disman:event:conf: _Xstatus table: Exist (extResult, 128)
>----------
>
>This shouldn't be an Existence entry - it ought to be generating a
>Boolean monitor.
>It's a bit difficult to tell, but is there a space between '!=' and '0' or not?
>There should be three parameters:
> extResult != 0
>and merging these will probably confuse the monitor parser.
>
>Try making sure that these are separate, and run the agent again.
>If things still don't work, can you please post the full results of
>walking the complete dismanEventMIB subtree.
>
>Dave


-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=...057&dat=121642
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/...net-snmp-users