Re: Using strings in MIB Tables

2008/5/6 Leif Pitcock <leifpitcock@yahoo.com>:
> What is the code you need in particular? It's alot of code, 1168 lines.
>
> Resent with copy to net-snmp-coders.

That's somewhat larger than most MIB table code, but not
excessively so. (The UDP and TCP tables are 770 and 900
lines of code respectively, and the original mteTriggerTable
code was not far short of 4000 lines!)

It's difficult to know what to ask for, without some idea of the
structure of your code. If you've got example code that
implements a single table, then post that.
Otherwise, post the whole thing (as an attachement
preferably), so we can extract the relevant bits.

In general it's probably better to provide too much information,
rather than too little :-)

Dave

-------------------------------------------------------------------------
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
http://ad.doubleclick.net/clk;198757...un.com/javaone
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/...et-snmp-coders