RE: [Samba] Unable to Join Domain

from : http://ftp.sernet.de/pub/services/samba/yum.txt

Howto use SerNet Samba packages with Yum:
-----------------------------------------

For example for RHEL 5 (tested packages):

- cd /etc/yum.repos.d
- wget http://ftp.sernet.de/pub/samba/teste...net-samba.repo
- yum install samba3

To use the latest packages, use
wget http://ftp.sernet.de/pub/samba/recen...net-samba.repo


SerNet Samba Team

-----------------------------------------------------------------
-- www.sambaxp.org -- www.enterprisesamba.com -- www.sernet.de --
-----------------------------------------------------------------



CentOS 5.2 would use the same instructions. except use the:
http://ftp.sernet.de/pub/samba/recen...net-samba.repo
repo.

You may [want to|have to] uninstall your samba before installing samba3 from
the sernet repo.

------------------------------------------------------------------------
Tony Hoover, Network Administrator
KSU - Salina, College of Technology and Aviation
(785) 826-2660

"Don't Blend in..."
------------------------------------------------------------------------

-----Original Message-----
From: Greg Koch [mailto:greg@ekingme.com]
Sent: Wednesday, September 03, 2008 5:15 PM
To: Hoover, Tony
Cc: Mike Eggleston; samba@lists.samba.org
Subject: RE: [Samba] Unable to Join Domain

I had 3.0.28a but when I attempt to install from yum the most current
version it supplies is 3.0.28-1.el5_2.1. I realize it is a different
package, but it didn't seem to solve my issue. Any help with getting yum to
give me a more current version, or other ideas to solve this issue?

On Wed, 3 Sep 2008 16:29:16 -0500, "Hoover, Tony" <hoover@sal.ksu.edu>
wrote:
> Samba 3.0.28a (from CentOS 5.2) would not allow me to add my new
> domain controller to the domain that it was supposed to be
> controlling. I uninstalled 3.0.28a and installed the 3.0.31 version
> (which was current
at
> that time).
>
> After the upgrade, I was able to join the domain with out difficulty.
>
> I submitted a bug-report to CentOS about this issue.
>
>
>
> ----------------------------------------------------------------------
> --
> Tony Hoover, Network Administrator
> KSU - Salina, College of Technology and Aviation
> (785) 826-2660
>
> "Don't Blend in..."
> ----------------------------------------------------------------------
> --
>
> -----Original Message-----
> From: samba-bounces+hoover=sal.ksu.edu@lists.samba.org
> [mailto:samba-bounces+hoover=sal.ksu.edu@lists.samba.org] On Behalf Of
> Greg Koch
> Sent: Wednesday, September 03, 2008 2:33 PM
> To: Mike Eggleston
> Cc: samba@lists.samba.org
> Subject: Re: [Samba] Unable to Join Domain
>
> The server is a WINS server, and I tried adding the server IP to the
> Advanced/WINS tab and I have the same problem.
>
> Any other ideas?
>
> On Tue, 2 Sep 2008 06:14:55 -0500, Mike Eggleston <mikeegg1@mac.com>
> wrote:
>> On Mon, 01 Sep 2008, Greg Koch might have said:
>>
>>> I recently setup a new server with CentOS 5.2. Everything works
>>> great
>> on
>>> the server except when I try to join the domain it simply tells me:
>>>
>>> "The following error occurred attempting to join the domain
>> "Domain":
>>>
>>> The user name could not be found.
>>
>> I have configured my samba box as a wins server and placed tht IP
>> address in the wins configuration dialog on the windows box I'm
>> joining to my samba PDC. (Start->Settings->Control Panel->Network
>> Connections->right-click on active network connection and choose
>> properties->double-click in TCP/IP (at the bottom)->Advanced->WINS tab).
>>
>> Mike
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/listinfo/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba

Well, the good news is that I was able to install version 3.0.32-36, but
now I seem to have some sort of name resolution error because I can't
access the server at all! When I navigate either to \\server or \\IP it
doesn't seem to make a connection, much less allow me to join the domain!
AH! I will see what I can work out. Thanks for your help thus far!

On Thu, 4 Sep 2008 08:26:30 -0500, "Hoover, Tony" <hoover@sal.ksu.edu>
wrote:
> from : http://ftp.sernet.de/pub/services/samba/yum.txt
>
> Howto use SerNet Samba packages with Yum:
> -----------------------------------------
>
> For example for RHEL 5 (tested packages):
>
> - cd /etc/yum.repos.d
> - wget http://ftp.sernet.de/pub/samba/teste...net-samba.repo
> - yum install samba3
>
> To use the latest packages, use
> wget http://ftp.sernet.de/pub/samba/recen...net-samba.repo
>
>
> SerNet Samba Team
>
> -----------------------------------------------------------------
> -- www.sambaxp.org -- www.enterprisesamba.com -- www.sernet.de --
> -----------------------------------------------------------------
>
>
>
> CentOS 5.2 would use the same instructions. except use the:
> http://ftp.sernet.de/pub/samba/recen...net-samba.repo
> repo.
>
> You may [want to|have to] uninstall your samba before installing samba3
> from
> the sernet repo.
>
> ------------------------------------------------------------------------
> Tony Hoover, Network Administrator
> KSU - Salina, College of Technology and Aviation
> (785) 826-2660
>
> "Don't Blend in..."
> ------------------------------------------------------------------------
>
> -----Original Message-----
> From: Greg Koch [mailto:greg@ekingme.com]
> Sent: Wednesday, September 03, 2008 5:15 PM
> To: Hoover, Tony
> Cc: Mike Eggleston; samba@lists.samba.org
> Subject: RE: [Samba] Unable to Join Domain
>
> I had 3.0.28a but when I attempt to install from yum the most current
> version it supplies is 3.0.28-1.el5_2.1. I realize it is a different
> package, but it didn't seem to solve my issue. Any help with getting yum
> to
> give me a more current version, or other ideas to solve this issue?
>
> On Wed, 3 Sep 2008 16:29:16 -0500, "Hoover, Tony" <hoover@sal.ksu.edu>
> wrote:
>> Samba 3.0.28a (from CentOS 5.2) would not allow me to add my new
>> domain controller to the domain that it was supposed to be
>> controlling. I uninstalled 3.0.28a and installed the 3.0.31 version
>> (which was current
> at
>> that time).
>>
>> After the upgrade, I was able to join the domain with out difficulty.
>>
>> I submitted a bug-report to CentOS about this issue.
>>
>>
>>
>> ----------------------------------------------------------------------
>> --
>> Tony Hoover, Network Administrator
>> KSU - Salina, College of Technology and Aviation
>> (785) 826-2660
>>
>> "Don't Blend in..."
>> ----------------------------------------------------------------------
>> --
>>
>> -----Original Message-----
>> From: samba-bounces+hoover=sal.ksu.edu@lists.samba.org
>> [mailto:samba-bounces+hoover=sal.ksu.edu@lists.samba.org] On Behalf Of
>> Greg Koch
>> Sent: Wednesday, September 03, 2008 2:33 PM
>> To: Mike Eggleston
>> Cc: samba@lists.samba.org
>> Subject: Re: [Samba] Unable to Join Domain
>>
>> The server is a WINS server, and I tried adding the server IP to the
>> Advanced/WINS tab and I have the same problem.
>>
>> Any other ideas?
>>
>> On Tue, 2 Sep 2008 06:14:55 -0500, Mike Eggleston <mikeegg1@mac.com>
>> wrote:
>>> On Mon, 01 Sep 2008, Greg Koch might have said:
>>>
>>>> I recently setup a new server with CentOS 5.2. Everything works
>>>> great
>>> on
>>>> the server except when I try to join the domain it simply tells me:
>>>>
>>>> "The following error occurred attempting to join the domain
>>> "Domain":
>>>>
>>>> The user name could not be found.
>>>
>>> I have configured my samba box as a wins server and placed tht IP
>>> address in the wins configuration dialog on the windows box I'm
>>> joining to my samba PDC. (Start->Settings->Control Panel->Network
>>> Connections->right-click on active network connection and choose
>>> properties->double-click in TCP/IP (at the bottom)->Advanced->WINS
> tab).
>>>
>>> Mike
>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/listinfo/samba

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba