Re: [Samba] unable to compile samba 3.0.28a on RHEL 5.1 i386

thanks that did it, gcc wasn't installed for some reason :), yum -y
install gcc-* worked and samba compiled fine.

Randall Svancara wrote:
> Try this and report back the output:
>
>
> rpm -qa |grep gcc
>
> Thanks,
>
> Randall
>
>
>
> On Tue, 2008-04-08 at 14:04 -0500, Adam Williams wrote:
>
>> any ideas why it won't compile? running
>> /root/samba-3.0.28a/packaging/RHEL/makerpms.sh
>> eventually it gets to:
>>
>>
>>
>> ./autogen.sh: running script/mkversion.sh
>> ./script/mkversion.sh: 'include/version.h' created for
>> Samba("3.0.28a")
>> ./autogen.sh: running autoheader -I. -Ilib/replace
>> ./autogen.sh: running autoconf -I. -Ilib/replace
>> Now run ./configure and then make.
>> + CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
>> -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386
>> -mtune=generic -fasynchronous-unwind-tables -D_GNU_SOURCE'
>> + ./configure --prefix=/usr --localstatedir=/var
>> --with-configdir=/etc/samba --with-libdir=/usr/lib/samba
>> --with-lockdir=/var/lib/samba --with-logfilebase=/var/log/samba
>> --with-mandir=/usr/share/man --with-piddir=/var/run
>> --with-privatedir=/etc/samba
>> --with-sambabook=/usr/share/swat/using_samba
>> --with-swatdir=/usr/share/swat --enable-cups --with-acl-support
>> --with-ads --with-automount --with-fhs --with-pam_smbpass
>> --with-libsmbclient --with-libsmbsharemodes --without-smbwrapper
>> --with-pam --with-quotas --with-shared-modules=idmap_rid,idmap_ad
>> --with-smbmount --with-syslog --with-utmp --with-dnsupdate
>> SAMBA VERSION: 3.0.28a
>> LIBREPLACE_LOCATION_CHECKS: START
>> checking build system type... i686-pc-linux-gnu
>> checking host system type... i686-pc-linux-gnu
>> checking target system type... i686-pc-linux-gnu
>> LIBREPLACE_LOCATION_CHECKS: END
>> LIBREPLACE_CC_CHECKS: START
>> checking for gcc... gcc
>> checking for C compiler default output file name... configure: error:
>> C
>> compiler cannot create executables
>> See `config.log' for more details.
>> error: Bad exit status from /var/tmp/rpm-tmp.12141 (%build)
>>
>>
>> RPM build errors:
>> Bad exit status from /var/tmp/rpm-tmp.12141 (%build)
>> makerpms.sh: Done.
>>
>>
>>
>> and config.log:
>>
>> [root@preshs RHEL]# cat
>> /usr/src/redhat/BUILD/samba-3.0.28a/source/config.log |more
>> This file contains any messages produced by compilers while
>> running configure, to aid debugging if configure makes a mistake.
>>
>> It was created by configure, which was
>> generated by GNU Autoconf 2.59. Invocation command line was
>>
>> $ ./configure --prefix=/usr --localstatedir=/var
>> --with-configdir=/etc/samba -
>> -with-libdir=/usr/lib/samba --with-lockdir=/var/lib/samba
>> --with-logfilebase=/va
>> r/log/samba --with-mandir=/usr/share/man --with-piddir=/var/run
>> --with-privatedi
>> r=/etc/samba --with-sambabook=/usr/share/swat/using_samba
>> --with-swatdir=/usr/sh
>> are/swat --enable-cups --with-acl-support --with-ads --with-automount
>> --with-fhs
>> --with-pam_smbpass --with-libsmbclient --with-libsmbsharemodes
>> --without-smbwra
>> pper --with-pam --with-quotas
>> --with-shared-modules=idmap_rid,idmap_ad
>> --with-sm
>> bmount --with-syslog --with-utmp --with-dnsupdate
>>
>> ## --------- ##
>> ## Platform. ##
>> ## --------- ##
>>
>> hostname = preshs.mdah.state.ms.us
>> uname -m = i686
>> uname -r = 2.6.18-53.el5PAE
>> uname -s = Linux
>> uname -v = #1 SMP Mon Nov 12 02:55:09 EST 2007
>>
>> /usr/bin/uname -p = unknown
>> /bin/uname -X = unknown
>>
>> /bin/arch = i686
>> /usr/bin/arch -k = unknown
>> /usr/convex/getsysinfo = unknown
>> hostinfo = unknown
>> /bin/machine = unknown
>> /usr/bin/oslevel = unknown
>> /bin/universe = unknown
>>
>> PATH: /usr/kerberos/sbin
>> PATH: /usr/kerberos/bin
>> PATH: /usr/local/sbin
>> PATH: /usr/local/bin
>> PATH: /sbin
>> PATH: /bin
>> PATH: /usr/sbin
>> PATH: /usr/bin
>> PATH: /root/bin
>>
>> ## ----------- ##
>> ## Core tests. ##
>> ## ----------- ##
>>
>> configure:1441: checking build system type
>> configure:1459: result: i686-pc-linux-gnu
>> configure:1467: checking host system type
>> configure:1481: result: i686-pc-linux-gnu
>> configure:1489: checking target system type
>> configure:1503: result: i686-pc-linux-gnu
>> configure:1975: checking for gcc
>> configure:1991: found /usr/bin/gcc
>> configure:2001: result: gcc
>> configure:2245: checking for C compiler version
>> configure:2248: gcc --version </dev/null >&5
>> gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-9)
>> Copyright (C) 2006 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions. There
>> is NO
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
>> PURPOSE.
>>
>> configure:2251: $? = 0
>> configure:2253: gcc -v </dev/null >&5
>> Reading specs from /usr/lib/gcc/i386-redhat-linux/3.4.6/specs
>> Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
>> --infodir=/u
>> sr/share/info --enable-shared --enable-threads=posix
>> --disable-checking
>> --with-s
>> ystem-zlib --enable-__cxa_atexit --disable-libunwind-exceptions
>> --enable-java-aw
>> t=gtk --host=i386-redhat-linux
>> Thread model: posix
>> gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)
>> configure:2256: $? = 0
>> configure:2258: gcc -V </dev/null >&5
>> gcc: `-V' option must have argument
>> configure:2261: $? = 1
>> configure:2284: checking for C compiler default output file name
>> configure:2287: gcc -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
>> -fexceptions -fst
>> ack-protector --param=ssp-buffer-size=4 -m32 -march=i386
>> -mtune=generic
>> -fasynch
>> ronous-unwind-tables -D_GNU_SOURCE -D_SAMBA_BUILD_=3 conftest.c
>>
>>> &5
>>>
>> gcc: installation problem, cannot exec `cc1': No such file or
>> directory
>> configure:2290: $? = 1
>> configure: failed program was:
>> | /* confdefs.h. */
>> |
>> | #define PACKAGE_NAME ""
>> | #define PACKAGE_TARNAME ""
>> | #define PACKAGE_VERSION ""
>> | #define PACKAGE_STRING ""
>> | #define PACKAGE_BUGREPORT ""
>> | #define CONFIG_H_IS_FROM_SAMBA 1
>> | /* end confdefs.h. */
>> |
>> | int
>> | main ()
>> | {
>> |
>> | ;
>> | return 0;
>> | }
>> configure:2329: error: C compiler cannot create executables
>> See `config.log' for more details.
>>
>> ## ---------------- ##
>> ## Cache variables. ##
>> ## ---------------- ##
>>
>> ac_cv_build=i686-pc-linux-gnu
>> ac_cv_build_alias=i686-pc-linux-gnu
>> ac_cv_env_CC_set=
>> ac_cv_env_CC_value=
>> ac_cv_env_CFLAGS_set=set
>> ac_cv_env_CFLAGS_value='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2
>> -fexceptions
>> -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386
>> -mtune=generic -fas
>> ynchronous-unwind-tables -D_GNU_SOURCE'
>> ac_cv_env_CPPFLAGS_set=
>> ac_cv_env_CPPFLAGS_value=
>> ac_cv_env_CPP_set=
>> ac_cv_env_CPP_value=
>> ac_cv_env_LDFLAGS_set=
>> ac_cv_env_LDFLAGS_value=
>> ac_cv_env_build_alias_set=
>> ac_cv_env_build_alias_value=
>> ac_cv_env_host_alias_set=
>> ac_cv_env_host_alias_value=
>> ac_cv_env_target_alias_set=
>> ac_cv_env_target_alias_value=
>> ac_cv_host=i686-pc-linux-gnu
>> ac_cv_host_alias=i686-pc-linux-gnu
>> ac_cv_prog_ac_ct_CC=gcc
>> ac_cv_prog_cc_Ae=no
>> ac_cv_target=i686-pc-linux-gnu
>> ac_cv_target_alias=i686-pc-linux-gnu
>>
>> ## ----------------- ##
>> ## Output variables. ##
>> ## ----------------- ##
>>
>> ACL_LIBS=''
>> AR=''
>> AUTH_LIBS=''
>> AUTH_MODULES=''
>> AUTH_STATIC=''
>> AWK=''
>> BROKEN_CC=''
>> BUILD_INIPARSER=''
>> BUILD_POPT=''
>> CC='gcc'
>> CFLAGS='-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
>> -fstack-protecto
>> r --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic
>> -fasynchronous-unwin
>> d-tables -D_GNU_SOURCE -D_SAMBA_BUILD_=3'
>> CHARSET_MODULES=''
>> CHARSET_STATIC=''
>> CIFSMOUNT_PROGS=''
>> CONFIG_LIBS=''
>> CPP=''
>> CPPFLAGS=''
>> CUPS_CONFIG=''
>> DEFAULT_TEST_TARGET=''
>> DEFS=''
>> DYNEXP=''
>> ECHO_C=''
>> ECHO_N='-n'
>> ECHO_T=''
>> EGREP=''
>> EXEEXT=''
>> EXTRA_ALL_TARGETS=''
>> EXTRA_BIN_PROGS=''
>> EXTRA_SBIN_PROGS=''
>> FLAGS1=''
>> HAVE_SOCKET_WRAPPER=''
>> HOST_OS=''
>> IDMAP_LIBS=''
>> IDMAP_MODULES=''
>> IDMAP_STATIC=''
>> INIPARSERLIBS=''
>> INSTALLLIBCMD_A=''
>> INSTALLLIBCMD_SH=''
>> INSTALL_CIFSMOUNT=''
>> INSTALL_DATA=''
>> INSTALL_LIBADDNS=''
>> INSTALL_LIBMSRPC=''
>> INSTALL_LIBSMBCLIENT=''
>> INSTALL_LIBSMBSHAREMODES=''
>> INSTALL_PAM_MODULES=''
>> INSTALL_PROGRAM=''
>> INSTALL_SCRIPT=''
>> KRB5CONFIG=''
>> KRB5_LIBS=''
>> LDAP_LIBS=''
>> LDBLDAP=''
>> LDFLAGS=''
>> LDSHFLAGS=''
>> LIBADDNS=''
>> LIBADDNS_SHARED=''
>> LIBDL=''
>> LIBMSRPC=''
>> LIBMSRPC_SHARED=''
>> LIBOBJS=''
>> LIBREPLACEOBJ='replace.o'
>> LIBREPLACE_OBJS=''
>> LIBS=''
>> LIBSMBCLIENT=''
>> LIBSMBCLIENT_SHARED=''
>> LIBSMBSHAREMODES=''
>> LIBSMBSHAREMODES_SHARED=''
>> LIBUNWIND_PTRACE=''
>> LTLIBOBJS=''
>> NSCD_LIBS=''
>> NSSSONAMEVERSIONSUFFIX=''
>> NSS_INFO_MODULES=''
>> NSS_INFO_STATIC=''
>> NSS_MODULES=''
>> OBJEXT=''
>> PACKAGE_BUGREPORT=''
>> PACKAGE_NAME=''
>> PACKAGE_STRING=''
>> PACKAGE_TARNAME=''
>> PACKAGE_VERSION=''
>> PAM_MODULES=''
>> PASSDB_LIBS=''
>> PATH_SEPARATOR=':'
>> PDB_MODULES=''
>> PDB_STATIC=''
>> PERL=''
>> PICFLAG=''
>> PIDL_ARGS=''
>> PIE_CFLAGS=''
>> PIE_LDFLAGS=''
>> POPTLIBS=''
>> PRINT_LIBS=''
>> PYTHON=''
>> ROFF=''
>> RPC_MODULES=''
>> RPC_STATIC=''
>> SAMBA_CPPFLAGS='-Iinclude -I./include -I. -I. -I./lib/replace
>> -I./lib/talloc -I
>> ./tdb/include -I./libaddns -I./librpc'
>> SHELL='/bin/sh'
>> SHLD=''
>> SHLIBEXT=''
>> SMBD_LIBS=''
>> SMBLDAP=''
>> SMBLDAPUTIL=''
>> SMBMOUNT_PROGS=''
>> SMB_FAM_LIBS=''
>> SMB_KRB5_LOCATOR=''
>> SOCKET_WRAPPER_OBJS=''
>> SONAMEFLAG=''
>> TERMLDFLAGS=''
>> TERMLIBS=''
>> UNINSTALLLIBCMD_A=''
>> UNINSTALLLIBCMD_SH=''
>> UNINSTALL_CIFSMOUNT=''
>> UNINSTALL_LIBADDNS=''
>> UNINSTALL_LIBMSRPC=''
>> UNINSTALL_LIBSMBCLIENT=''
>> UNINSTALL_LIBSMBSHAREMODES=''
>> UNINSTALL_PAM_MODULES=''
>> UUID_LIBS=''
>> VFS_MODULES=''
>> VFS_STATIC=''
>> WINBIND_NSS=''
>> WINBIND_NSS_EXTRA_LIBS=''
>> WINBIND_NSS_EXTRA_OBJS=''
>> WINBIND_NSS_LDSHFLAGS=''
>> WINBIND_WINS_NSS=''
>> ac_ct_AR=''
>> ac_ct_CC='gcc'
>> bindir='${exec_prefix}/bin'
>> build='i686-pc-linux-gnu'
>> build_alias=''
>> build_cpu='i686'
>> build_os='linux-gnu'
>> build_vendor='pc'
>> builddir=''
>> configdir='/etc/samba'
>> datadir='${prefix}/share'
>> exec_prefix='NONE'
>> host='i686-pc-linux-gnu'
>> host_alias=''
>> host_cpu='i686'
>> host_os='linux-gnu'
>> host_vendor='pc'
>> includedir='${prefix}/include'
>> infodir='${prefix}/info'
>> libdir='/usr/lib/samba'
>> libexecdir='${exec_prefix}/libexec'
>> libreplace_cv_immediate_structures=''
>> libreplacedir='./lib/replace'
>> localstatedir='/var'
>> lockdir='/var/lib/samba'
>> logfilebase='/var/log/samba'
>> mandir='/usr/share/man'
>> oldincludedir='/usr/include'
>> pammodulesdir='${LIBDIR}/security'
>> piddir='/var/run'
>> precompiled_headers=''
>> prefix='/usr'
>> privatedir='/etc/samba'
>> program_transform_name='s,x,x,'
>> rootsbindir='${SBINDIR}'
>> sbindir='${exec_prefix}/sbin'
>> selftest_prefix=''
>> sharedstatedir='${prefix}/com'
>> smbtorture4_path=''
>> swatdir='/usr/share/swat'
>> sysconfdir='${prefix}/etc'
>> target='i686-pc-linux-gnu'
>> target_alias=''
>> target_cpu='i686'
>> target_os='linux-gnu'
>> target_vendor='pc'
>>
>> ## ----------- ##
>> ## confdefs.h. ##
>> ## ----------- ##
>>
>> #define CONFIG_H_IS_FROM_SAMBA 1
>> #define PACKAGE_BUGREPORT ""
>> #define PACKAGE_NAME ""
>> #define PACKAGE_STRING ""
>> #define PACKAGE_TARNAME ""
>> #define PACKAGE_VERSION ""
>>
>> configure: exit 77
>> [root@preshs RHEL]#
>>
>>
>>

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba