RE: [Samba] Samba + cups = raw postscript output

> -----Original Message-----
> From: Chris [mailto:smb23@realcomputerguy.com]=20
> Sent: 09 March 2006 15:57
> To: samba@lists.samba.org
> Cc: David Smith
> Subject: Re: [Samba] Samba + cups =3D raw postscript output
>=20
> On Thursday 09 March 2006 06:38, David Smith wrote:
> > I have a printer HP LaserJet 2100 which works fine, and by looking
> > at the cups log files, works as follows:
> > =A0 - Client submits Postscript Lvl3
>=20
> Just to add. I've had a 2100 since they were first introduced and it=20
> handles PS 2 just fine. With the proper PPD the client should=20
> send PS 2=20
> and the printer should receive PS 2, there should be no conversion to=20
> PCL. At least, under ideal circumstances, there shouldn't need to be.

In addition, I have tried setting the CUPS 6 Test driver to produce=20
Postscript Level 1, 2 and 3 and none of the render a document to the=20
Laserjet 5si. The default PPD for the LaserJet series is the one that=20
I used first time with the LaserJet 2100, and it worked fine, so I =
haven't
Tried to change it.

However, the Laserjet 5si is the one I'm having the most difficulty=20
Understanding, or maybe it's a samba setting, or cups setting....

Dave

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba