[Samba] Winbind problem - 3.0.20a and NT4 domain

All -

We are using 3.0.20a on SLES 9 and are trying to configure a member server
for our NT4 domain. The wbinfo commands (-u and -g) show correct
information. The getent commands (passwd and group) work fine also. If
Samba is running without winbind, I can see the shares in the config file
(net view \\xxxxxxxx) from a PC. With winbind running I get an error
message about the computer name being in an invalid format. Below is a
portion of the log.winbind during the "net view \\xxxxxxx":

[2005/10/06 17:08:41, 3] smbd/oplock.c:init_oplocks(1380)
open_oplock_ipc: opening loopback UDP socket.
[2005/10/06 17:08:41, 3]
smbd/oplock_linux.c:linux_init_kernel_oplocks(309)
Linux kernel oplocks enabled
[2005/10/06 17:08:41, 3] smbd/oplock.c:init_oplocks(1411)
open_oplock ipc: pid = 30366, global_oplock_port = 32788
[2005/10/06 17:08:41, 3] smbd/process.c:process_smb(1114)
Transaction 0 of length 137
[2005/10/06 17:08:41, 3] smbd/process.c:switch_message(900)
switch message SMBnegprot (pid 30366) conn 0x0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [PC NETWORK PROGRAM 1.0]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [LANMAN1.0]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [Windows for Workgroups 3.1a]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [LM1.2X002]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [LANMAN2.1]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(466)
Requested protocol [NT LM 0.12]
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_nt1(337)
using SPNEGO
[2005/10/06 17:08:41, 3] smbd/negprot.c:reply_negprot(559)
Selected protocol NT LM 0.12
[2005/10/06 17:08:41, 3] smbd/process.c:process_smb(1114)
Transaction 1 of length 240
[2005/10/06 17:08:41, 3] smbd/process.c:switch_message(900)
switch message SMBsesssetupX (pid 30366) conn 0x0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_sesssetup_and_X(751)
wct=12 flg2=0xc807
[2005/10/06 17:08:41, 2] smbd/sesssetup.c:setup_new_vc_session(704)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close
all old resources.
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(588)
Doing spnego session setup
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(619)
NativeOS=[Windows 2002 Service Pack 2 2600] NativeLanMan=[Windows 2002
5.1] PrimaryDomain=[]
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_spnego_negotiate(480)
Got OID 1 3 6 1 4 1 311 2 2 10
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_spnego_negotiate(483)
Got secblob of size 40
[2005/10/06 17:08:41, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
Got NTLMSSP neg_flags=0xe2088297
[2005/10/06 17:08:41, 3] smbd/process.c:process_smb(1114)
Transaction 2 of length 356
[2005/10/06 17:08:41, 3] smbd/process.c:switch_message(900)
switch message SMBsesssetupX (pid 30366) conn 0x0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_sesssetup_and_X(751)
wct=12 flg2=0xc807
[2005/10/06 17:08:41, 2] smbd/sesssetup.c:setup_new_vc_session(704)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close
all old resources.
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(588)
Doing spnego session setup
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(619)
NativeOS=[Windows 2002 Service Pack 2 2600] NativeLanMan=[Windows 2002
5.1] PrimaryDomain=[]
[2005/10/06 17:08:41, 3] libsmb/ntlmssp.c:ntlmssp_server_auth(606)
Got user=[bdehn] domain=[OREILLY] workstation=[IS101180] len1=24 len2=24
[2005/10/06 17:08:41, 3] auth/auth.c:check_ntlm_password(219)
check_ntlm_password: Checking password for unmapped user
[OREILLY]\[bdehn]@[IS101180] with the new password interface
[2005/10/06 17:08:41, 3] auth/auth.c:check_ntlm_password(222)
check_ntlm_password: mapped user is: [OREILLY]\[bdehn]@[IS101180]
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:push_sec_ctx(256)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2005/10/06 17:08:41, 3] smbd/uid.c:push_conn_ctx(388)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:pop_sec_ctx(386)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 2] auth/auth.c:check_ntlm_password(317)
check_ntlm_password: Authentication for user [bdehn] -> [bdehn] FAILED
with error NT_STATUS_INVALID_COMPUTER_NAME
[2005/10/06 17:08:41, 3] smbd/process.c:process_smb(1114)
Transaction 3 of length 240
[2005/10/06 17:08:41, 3] smbd/process.c:switch_message(900)
switch message SMBsesssetupX (pid 30366) conn 0x0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_sesssetup_and_X(751)
wct=12 flg2=0xc807
[2005/10/06 17:08:41, 2] smbd/sesssetup.c:setup_new_vc_session(704)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close
all old resources.
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(588)
Doing spnego session setup
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(619)
NativeOS=[Windows 2002 Service Pack 2 2600] NativeLanMan=[Windows 2002
5.1] PrimaryDomain=[]
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_spnego_negotiate(480)
Got OID 1 3 6 1 4 1 311 2 2 10
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_spnego_negotiate(483)
Got secblob of size 40
[2005/10/06 17:08:41, 3] libsmb/ntlmssp.c:debug_ntlmssp_flags(62)
Got NTLMSSP neg_flags=0xe2088297
[2005/10/06 17:08:41, 3] smbd/process.c:process_smb(1114)
Transaction 4 of length 356
[2005/10/06 17:08:41, 3] smbd/process.c:switch_message(900)
switch message SMBsesssetupX (pid 30366) conn 0x0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sesssetup.c:reply_sesssetup_and_X(751)
wct=12 flg2=0xc807
[2005/10/06 17:08:41, 2] smbd/sesssetup.c:setup_new_vc_session(704)
setup_new_vc_session: New VC == 0, if NT4.x compatible we would close
all old resources.
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(588)
Doing spnego session setup
[2005/10/06 17:08:41, 3]
smbd/sesssetup.c:reply_sesssetup_and_X_spnego(619)
NativeOS=[Windows 2002 Service Pack 2 2600] NativeLanMan=[Windows 2002
5.1] PrimaryDomain=[]
[2005/10/06 17:08:41, 3] libsmb/ntlmssp.c:ntlmssp_server_auth(606)
Got user=[bdehn] domain=[OREILLY] workstation=[IS101180] len1=24 len2=24
[2005/10/06 17:08:41, 3] auth/auth.c:check_ntlm_password(219)
check_ntlm_password: Checking password for unmapped user
[OREILLY]\[bdehn]@[IS101180] with the new password interface
[2005/10/06 17:08:41, 3] auth/auth.c:check_ntlm_password(222)
check_ntlm_password: mapped user is: [OREILLY]\[bdehn]@[IS101180]
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:push_sec_ctx(256)
push_sec_ctx(0, 0) : sec_ctx_stack_ndx = 1
[2005/10/06 17:08:41, 3] smbd/uid.c:push_conn_ctx(388)
push_conn_ctx(0) : conn_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 1
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:pop_sec_ctx(386)
pop_sec_ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 2] auth/auth.c:check_ntlm_password(317)
check_ntlm_password: Authentication for user [bdehn] -> [bdehn] FAILED
with error NT_STATUS_INVALID_COMPUTER_NAME
[2005/10/06 17:08:41, 3] smbd/process.c:timeout_processing(1366)
timeout_processing: End of file from client (client has disconnected).
[2005/10/06 17:08:41, 3] smbd/sec_ctx.c:set_sec_ctx(288)
setting sec ctx (0, 0) - sec_ctx_stack_ndx = 0
[2005/10/06 17:08:41, 2] smbd/server.c:exit_server(612)
Closing connections
[2005/10/06 17:08:41, 3] smbd/connection.c:yield_connection(69)
Yielding connection to
[2005/10/06 17:08:41, 3] smbd/server.c:exit_server(656)
Server exit (normal exit)


Any help would be greatly appreciated!!!!


Bob Dehn

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba