ssh tunnel proxy setup

Hi all..
am trying to incorporate a tunnel from over a slow setup ........

/-------------------------/
/-------------------------------/
| host1 |=========//Tunnel ssh
//====================| Host2 |
| squid parent |
| squid
http_port 3128 |
| 127.0.0.1:8080
|
| acl accept all |
\-------------------------\
\-------------------------------\

Host1 configuration :
ssh -L 8080:127.0.0.1:3128 -C -N -f client@host2

The tunnel goes through the link and forwards port 8080 to 3128 from
host1 to host2
main reason is that the actual link size is 2Mbit/s and i need to pass
the data in compression to gain maximum http transparent proxied data
transfer from Host2 to Host1.
It works fine as long as i don't have heavy load but when i connect
Host1 to the local home network i start having some delay after a
certain amount of time i believe when the clients establish sessions
through squid which redirected to parents over the Tunnel session created .
i have separated the logs squid log shows normal connectivity but on the
console after ssh established i got this message

channel 149: open failed: connect failed: Connection timed out
channel 111: open failed: connect failed: Connection timed out
channel 176: open failed: connect failed: Connection timed out
channel 193: open failed: connect failed: Connection timed out

and afterwards the connectivity degrades remarkably ....

anyone has got any clue for what this might be.. thanks in advance :)

Regards
F.B.
_______________________________________________
openssh-unix-dev mailing list
openssh-unix-dev@mindrot.org
http://lists.mindrot.org/mailman/lis...enssh-unix-dev