Re: [mrtg] mrtg and bonding

It's a problem with the way that snmpd reports the speed on bonded
interfaces. The bondx is always set to 10M by default, but you can fix
it by adding a line to your snmpd.conf for each bonded interface:

override ifSpeed.X uinteger 1000000000

Replace the "X" with the interface number of the bonded interface and it
will report the speed you set as the fourth token in the line.

Take a look at this page for more details:

http://whocares.de/2007/12/28/speed-up-your-bonds/

Dave


On Thu, April 10, 2008 3:55 am, Steffen Knauf wrote:
> Hello!
>
> i have a problem with the Max Speed of the bond0 (mode2).
> MRTG set Max Speed 10.0 Mbits/s, although i use the option
> --zero-speed=1000000000 with cfgmaker.
> And bond0 should be the sum of eth0 and eth1 but the result of the graph
> is more less than ths sum.
> Here is the output of dmesg | grep -i bond0 :
> bonding: bond0: setting mode to balance-xor (2).
> bonding: bond0: Setting MII monitoring interval to 100.
> bonding: bond0: enslaving eth0 as an active interface with an up link.
> bonding: bond0: enslaving eth1 as an active interface with an up link.
>
> Perhaps anybody have some Ideas?
> Tanks!
>
> Steffen
>
> _______________________________________________
> mrtg mailing list
> mrtg@lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
>
>


--
David Gavin - Senior Systems Administrator
Vcentrix, Inc. 19 Crosby Drive Suite 200 Bedford, MA, USA 01730
email: dgavin@vcentrix.net Tel: 617.904.5014 Fax:781.687.8882

_______________________________________________
mrtg mailing list
mrtg@lists.oetiker.ch
https://lists.oetiker.ch/cgi-bin/listinfo/mrtg