This is a discussion on networking with ethernet and wlan in my box within the Linux Networking forums, part of the Linux Forums category; Hi, I have a linux box running Linux kernel 2.6.12-18mdk Mandriva 2006 In it I have had ...
|
|||||||
| FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|||
|
Hi,
I have a linux box running Linux kernel 2.6.12-18mdk Mandriva 2006 In it I have had a pci lan card for some time. It connects to the internet via my adsl modem/router. I have just put a wireless pci lan card in it as well. I have a firewall at my ISP and on the modem/router so, as a temporary measure and to make sure it didn't interfere with any connection attempts I disabled it on my Linux box. I now have an old laptop with Win9Se and vector linux kernel sata-2.4.29 on it. I have put a wireless lan card in it and am at present trying to get the laptop to connect to the linux box and have access to the internet. I am struggling as the laptop cannot connect properly. For the linux box: To start with I had a static ip address 192.168.1.100 for the eth0 card and tried 192.168.1.50 for wlan0 card in Ad-hoc mode On the laptop: to start with I have tried to configure windows to connect. The card was given an ip 0f 192.168.1.70 The software was configured to connect and found the wireless lan. It seemed to find the linux wireless card with no trouble and connected to the wireless lan but that is all. Ping got no replies and no site could be found either by name or ip address. I then decided to set up dhcpd on my modem/router and set up both boxes to use dhcp Addresses were assigned but I still can get no further. /sbin/ifconfig shows: eth0 Link encap:Ethernet HWaddr 00:0B:6A:BA:45:E9 inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:feba:45e9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:92 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1329 (1.2 KiB) TX bytes:12152 (11.8 KiB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:134 errors:0 dropped:0 overruns:0 frame:0 TX packets:134 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:20372 (19.8 KiB) TX bytes:20372 (19.8 KiB) wlan0 Link encap:Ethernet HWaddr 00:15:F2:51:D1:EA inet6 addr: fe80::215:f2ff:fe51:d1ea/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:103 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14468 (14.1 KiB) TX bytes:10386 (10.1 KiB) Memory:dfffa000-dfffbfff wlan0:9 Link encap:Ethernet HWaddr 00:15:F2:51:D1:EA inet addr:127.255.255.255 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:dfffa000-dfffbfff netstat -rn gives: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 I am by no means an expert at this so wonder if you guys can point me in the right direction? tia, Norm |
|
|||
|
Norman Elliott wrote:
> Hi, > > I have a linux box running Linux kernel 2.6.12-18mdk Mandriva 2006 > In it I have had a pci lan card for some time. It connects to the > internet via my adsl modem/router. > > I have just put a wireless pci lan card in it as well. > > I have a firewall at my ISP and on the modem/router so, as a temporary > measure and to make sure it didn't interfere with any connection > attempts I disabled it on my Linux box. > > I now have an old laptop with Win9Se and vector linux kernel sata-2.4.29 > on it. > > I have put a wireless lan card in it and am at present trying to get the > laptop to connect to the linux box and have access to the internet. > > I am struggling as the laptop cannot connect properly. > > For the linux box: > To start with I had a static ip address 192.168.1.100 for the eth0 card > > and tried 192.168.1.50 for wlan0 card in Ad-hoc mode > > On the laptop: > to start with I have tried to configure windows to connect. > The card was given an ip 0f 192.168.1.70 > > The software was configured to connect and found the wireless lan. It > seemed to find the linux wireless card with no trouble and connected to > the wireless lan but that is all. > > Ping got no replies and no site could be found either by name or ip > address. > > I then decided to set up dhcpd on my modem/router and set up both boxes > to use dhcp > Addresses were assigned but I still can get no further. > > /sbin/ifconfig shows: > eth0 Link encap:Ethernet HWaddr 00:0B:6A:BA:45:E9 > inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::20b:6aff:feba:45e9/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:6 errors:0 dropped:0 overruns:0 frame:0 > TX packets:92 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1329 (1.2 KiB) TX bytes:12152 (11.8 KiB) > Interrupt:23 Base address:0xc000 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:16436 Metric:1 > RX packets:134 errors:0 dropped:0 overruns:0 frame:0 > TX packets:134 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:20372 (19.8 KiB) TX bytes:20372 (19.8 KiB) > > wlan0 Link encap:Ethernet HWaddr 00:15:F2:51:D1:EA > inet6 addr: fe80::215:f2ff:fe51:d1ea/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:103 errors:0 dropped:0 overruns:0 frame:0 > TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:14468 (14.1 KiB) TX bytes:10386 (10.1 KiB) > Memory:dfffa000-dfffbfff > > wlan0:9 Link encap:Ethernet HWaddr 00:15:F2:51:D1:EA > inet addr:127.255.255.255 Bcast:127.255.255.255 Mask:255.0.0.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > Memory:dfffa000-dfffbfff > > netstat -rn gives: > Kernel IP routing table > Destination Gateway Genmask Flags MSS Window irtt > Iface > 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 > eth0 > 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 > eth0 > > > I am by no means an expert at this so wonder if you guys can point me in > the right direction? > tia, > Norm All sorted, Needed wlan0 on different subnet to eth0. Set laptop Ip address in same range as wlan0 card with gateway ip address to that of wlan card. then used Mandriva Control centre on main PC to allow internet sharing. Now all seems to work ifconfig : eth0 Link encap:Ethernet HWaddr 00:0B:6A:BA:45:E9 inet addr:192.168.1.30 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20b:6aff:feba:45e9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4487 errors:0 dropped:0 overruns:0 frame:0 TX packets:9845 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3582010 (3.4 MiB) TX bytes:849985 (830.0 KiB) Interrupt:23 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1951 errors:0 dropped:0 overruns:0 frame:0 TX packets:1951 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:127518 (124.5 KiB) TX bytes:127518 (124.5 KiB) wlan0 Link encap:Ethernet HWaddr 00:15:F2:51:D1:EA inet addr:192.168.2.30 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::215:f2ff:fe51:d1ea/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1036 errors:0 dropped:0 overruns:0 frame:0 TX packets:1008 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:120675 (117.8 KiB) TX bytes:568176 (554.8 KiB) Memory:dfffa000-dfffbfff nestat -rn : Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 Norm |