via-rhine kernel options

This is a discussion on via-rhine kernel options within the Linux Networking forums, part of the Linux Forums category; Help Can anyone tell me which parameter of the kernel option ether=0,0,param1,param2,...,eth#, controls the media ...

		Usenet Forums > Linux Forums > Linux Networking
via-rhine kernel options

LinkBack

Thread Tools

Display Modes

#1 (permalink)

07-08-2004

Paul

Posts: n/a

via-rhine kernel options

Help

Can anyone tell me which parameter of the kernel option

ether=0,0,param1,param2,...,eth#,

controls the media type for the via-rhine driver?

i.e.
0x10 for half-duplex 10Mbps
0x20 for full-duplex 10Mbps
0x100 for half-duplex 100Mbps
0x200 for full-duplex 100Mbps

Much appreciated

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are Off [IMG] code is Off HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT +1. The time now is 07:38 AM.