After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses)

This is a discussion on After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses) within the Linux Networking forums, part of the Linux Forums category; I'm recently upgraded the kernel from 2.4.26 to 2.6.3. Everything works, but Mozilla is now ...


Go Back   Usenet Forums > Linux Forums > Linux Networking

FAQ Members List Calendar Search Today's Posts Mark Forums Read
  #1 (permalink)  
Old 06-09-2004
nj
 
Posts: n/a
Default After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses)

I'm recently upgraded the kernel
from 2.4.26 to 2.6.3.

Everything works, but Mozilla is now unusable. When I
go to a URL, it just sits there with (e.g.)

Resolving host login.yahoo.com

at the bottom in the status frame, for about 40
seconds. Thinking I maybe had some DNS setup problem,
I tried typing "dig login.yahoo.com" at a shell prompt
- it completed in less time than I could measure with
a stopwatch, probably less than one second. The same
is found with all URLs. It doesn't matter whether I do
the "dig" before or after going to the site with
Mozilla.

It's as though it's waiting for some stupid timeout.
But where do I look?

The output from uname -a is:
Linux Leo 2.6.3-1-k7 #2 Tue Feb 24 20:39:50 EST 2004
i686 GNU/Linux

The Mozilla version is 1.6, or more precisely:
Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.6) Gecko/20040113

I'm using the Debian 'Sarge' distro.

I can't even think of anything to investigate. Ideas? Seen something
like this before?
Reply With Quote
  #2 (permalink)  
Old 06-09-2004
Bit Twister
 
Posts: n/a
Default Re: After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses)

On 9 Jun 2004 12:30:42 -0700, nj wrote:
> I'm recently upgraded the kernel
> from 2.4.26 to 2.6.3.
>
> Everything works, but Mozilla is now unusable. When I
> go to a URL, it just sits there with (e.g.)
>
> Resolving host login.yahoo.com
>
> at the bottom in the status frame, for about 40
> seconds. Thinking I maybe had some DNS setup problem,


Check /etc/resolv.conf for just your dns srevers.
Maybe one is slow, swap lines to try the other one.

I remove the search line. Example only.
$ cat /etc/resolv.conf
nameserver 216.148.227.168
nameserver 204.127.202.142
Reply With Quote
  #3 (permalink)  
Old 06-10-2004
nj
 
Posts: n/a
Default Re: After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses)

Bit Twister <BitTwister@localhost.localdomain> wrote in message news:<slrnccer35.ej2.BitTwister@wb.home.invalid>.. .
> On 9 Jun 2004 12:30:42 -0700, nj wrote:
> > I'm recently upgraded the kernel
> > from 2.4.26 to 2.6.3.
> >
> > Everything works, but Mozilla is now unusable. When I
> > go to a URL, it just sits there with (e.g.)
> >
> > Resolving host login.yahoo.com
> >
> > at the bottom in the status frame, for about 40
> > seconds. Thinking I maybe had some DNS setup problem,

>
> Check /etc/resolv.conf for just your dns srevers.
> Maybe one is slow, swap lines to try the other one.
>
> I remove the search line. Example only.
> $ cat /etc/resolv.conf
> nameserver 216.148.227.168
> nameserver 204.127.202.142


Tried it, no difference.
"dig" can also be used to query each DNS separately (dig
@xxx.xxx.xxx.xxx) and it shows that both servers are very fast (query
time less than a second).
Thanks for taking the time to respond.
Reply With Quote
  #4 (permalink)  
Old 06-10-2004
Cameron Kerr
 
Posts: n/a
Default Re: After 2.4.x ->2.6.3 upgrade, Mozilla is unusable (long pauses)

nj <halbtaxabo-njlinux@yahoo.com> wrote:

> I'm recently upgraded the kernel from 2.4.26 to 2.6.3.
>
> Everything works, but Mozilla is now unusable. When I go to a URL, it
> just sits there with (e.g.)
>
> Resolving host login.yahoo.com
>
> at the bottom in the status frame, for about 40 seconds. [...]


Do other programs show this behaivour? lynx, wget etc.

Is login.yahoo.com still up?

Can you get to other sites?

Can you get to other SSL sites? I'm guessing that login.yahoo.com is an
SSL site (https://). If its only SSL sites that are effected, and
probably also ssh, then perhaps its running out of entropy. Does your
hardware have a random number generator? Do you have support for it
loaded? If not, using an entropy gathering daemon may help.

> It's as though it's waiting for some stupid timeout. But where do I
> look?


Easiest way would be to use strace to see what its doing. Find the PID
of mozilla (`pstree -p $USER' and look for the mozilla-bin process),
then run `strace -p PID -e trace=network,file,read', and report back
where its hanging. Actually, since the trace will be quite large, I
would suggest you send it directly to me, and I'll weed it and post it
to the list, if you can't understand it yourself.

--
Cameron Kerr
cameron.kerr@paradise.net.nz : http://nzgeeks.org/cameron/
Empowered by Perl!
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 02:11 PM.


Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.0.0