Re: Problems installing pfil on Sun Fire V240

Hi Chet£¬

I met the same phenomenon, but when I start ipfilter it works.

I don't understand what's going on.


> We are trying to install ipfilter 4.1.7 on one of our Sun Fire V240s
> here and are having problems getting the pfil installation
> complete. Following the README I was able to build and install the
> latest pfil package (solairs make, forte 7.0). The installation of the
> package completed with no errors, /etc/opt/pfil/iu.ap looks correct
> and the reboot was clean. However when I run the strconf command (
> "strconf < /dev/bge" ) I don't see pfil. The ipconfig <if> modlist and
> modinsert commands worked ok but I suspect the lack of the pfil in the
> streams list is going to be a problem. Anyone have idea what might be
> going on here?

> Relevant data:
> [root@wrls-app1 /]# cat /etc/opt/pfil/iu.ap
> bge -1 0 pfil

> [root@wrls-app1 /]# ifconfig -a
> lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
> inet 127.0.0.1 netmask ff000000
> bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
> inet 128.125.253.163 netmask ffffff00 broadcast 128.125.253.255
> ether 0:3:ba:82:88:8d

> [root@wrls-app1 /]# strconf < /dev/bge
> bge

> [root@wrls-app1 /]# ifconfig bge0 modlist
> 0 arp
> 1 ip
> 2 pfil
> 3 bge

> [root@wrls-app1 /]# uname -a
> SunOS wrls-app1.usc.edu 5.9 Generic_117171-05 sun4u sparc SUNW,Sun-Fire-V240

> [root@wrls-app1 /]# isainfo -vk
> 64-bit sparcv9 kernel modules






--
-- --
Regards


Joe Shen

******************************************
* The sunshine of lifetime is made up of *
* little beams which is bright all the *
* time. *
******************************************