Re: (no subject)

permalink · #1 (**permalink**) 04-20-2005

This is a MIME message. If you are reading this text, you may want to
consider changing to a mail reader or gateway that understands how to
properly handle MIME multipart messages.

--=__Part6C4F46FD.0__=
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

HI,
Can you run the server in debug mode and post the messages
that you get.

-Sayantan.

>>>andre@glodde-herkenrath.de 04/19/05 5:52 pm >>>
Hi,

I have a very strange problem.
I authenticate a user agains a Novell 6 Server, which is not the
problem.
But I need some Attributes from the authentication brought back to the
NAS

I put these in the users file and it worked with another server:

Users (complete)
-----------------
DEFAULT Auth-Type :=LDAP ,Ldap-Group == CN=WGRAS,O=FKEL
Reply-Message = Welcome, you are allowed to have dialup
access,
Framed-Filter-Id = std.ppp,
Fall-Through = 0
------------------
The Ldap portion of the radiusd.conf (comments removed)
----------------

ldap {
server = 170.56.185.59
identity = anonymous
basedn = OU=Abteilungen,O=FKEL
filter = (uid=%{Stripped-User-Name:-%{User-Name}})
start_tls = no
dictionary_mapping = ${raddbdir}/ldap.attrmap
ldap_connections_number = 5
groupmembership_attribute = radiusGroupName
timeout = 20
timelimit = 20
net_timeout = 10
}

Strangely the binds need a very long time (up to 8 seconds each) - but
what has this to do with the not transmitting the Attributes ??

As I said, the authentication works, but the Attributes are missing -
Any Ideas ?

Regards
Andre

-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html

--=__Part6C4F46FD.0__=
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

<html>
<head>
<style type=3D"text/css">

</style>
=20
</head>
<body style=3D"margin-right: 4px; margin-bottom: 1px; margin-top: 4px; =
margin-left: 4px">
<DIV> HI,
</DIV>
<DIV>   Can you run the server in debug mode and post =
the messages=20
</DIV>
<DIV>that you get.=20
</DIV>
<DIV> </DIV>
<DIV>-Sayantan.<br><br>>>>andre@glodde-herkenrath.de 04/19/05 =
5:52 pm >>><br>Hi,<br><br>I have a very strange problem.<br>I =
authenticate a user agains a Novell 6 Server, which is not the<br>probl=
em.<br>But I need some Attributes from the authentication brought back to =
the<br>NAS<br><br>I put these in the users file and it worked with another =
server:<br><br>Users (complete)<br>-----------------<br>DEFAULT =
Auth-Type :=LDAP ,Ldap-Group == "CN=WGRAS,O&#6=
1;FKEL"<br>       Reply-Message =
= "Welcome, you are allowed to have dialup<br>access"&#44=
;<br>       Framed-Filter-Id = =
"std.ppp",<br>       Fall-=
Through = 0<br>------------------<br>The Ldap portion of the radiusd.co=
nf (comments removed)<br>----------------<br><br>ldap {<b=
r>            &=
#160;  server = "170.56.185.59"<br>  &#16=
0;            i=
dentity = "anonymous"<br>      =
         basedn = =
"OU=Abteilungen,O=FKEL"<br>    &#=
160;          filter =
= "(uid=%{Stripped-User-Name:-%{User-Nam=
e}})"<br>       &#160=
;       start_tls = no<br> &#16=
0;            &=
#160;dictionary_mapping = ${raddbdir}/ldap.attrmap<br>&#1=
60;            =
  ldap_connections_number = 5<br>   groupmembe=
rship_attribute = radiusGroupName<br>     &#16=
0;         timeout = =
20<br>           &#1=
60;   timelimit = 20<br>     &#=
160;         net_timeout =
= 10<br>       }<br><br>Strange=
ly the binds need a very long time (up to 8 seconds each) - =
but<br>what has this to do with the not transmitting the Attributes =
??<br><br>As I said, the authentication works, but the =
Attributes are missing -<br>Any Ideas ?<br><br>Regards<br>Andre<br><br>=
<br>-<br>List info/subscribe/unsubscribe? See http://www.freeradius.org=
/list/users.html<br> </DIV>

</body>
</html>

--=__Part6C4F46FD.0__=--

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode