Windows XP(SP2) PEAP Authentication

permalink · #1 (**permalink**) 03-24-2005

--0-1881806822-1111647148=:72586
Content-Type: text/plain; charset=us-ascii

Hi,

I fail to authenticate the windows xp client. Can anybody help?
Below are the related settings.

In D-Link DWL-900AP+
Authentication = WPA
WEP Encryption = 64bit
Key Type = Hex

For Compex Wireless-G USB Adapter
Network Authentication = WPA
Data Encryption = TKIP

rad_recv: Access-Request packet from host 192.168.0.50:1206, id=1, length=135

User-Name = "kschiam"

NAS-IP-Address = 192.168.0.50

NAS-Port = 0

Called-Station-Id = "00-0F-3D-46-84-85"

Calling-Station-Id = "00-06-F4-0A-92-34"

NAS-Identifier = "DWL-900AP+"

Framed-MTU = 1380

NAS-Port-Type = Wireless-802.11

EAP-Message = 0x0201000c016b73636869616d

Message-Authenticator = 0x0a48e074e852e068a66f1972614ad9d9

Processing the authorize section of radiusd.conf

modcall: entering group authorize for request 0

modcall[authorize]: module "preprocess" returns ok for request 0

modcall[authorize]: module "mschap" returns noop for request 0

rlm_realm: No '@' in User-Name = "kschiam", looking up realm NULL

rlm_realm: No such realm "NULL"

modcall[authorize]: module "suffix" returns noop for request 0

rlm_eap: EAP packet type response id 1 length 12

rlm_eap: No EAP Start, assuming it's an on-going EAP conversation

modcall[authorize]: module "eap" returns updated for request 0

users: Matched kschiam at 97

modcall[authorize]: module "files" returns ok for request 0

modcall: group authorize returns updated for request 0

rad_check_password: Found Auth-Type EAP

auth: type "EAP"

Processing the authenticate section of radiusd.conf

modcall: entering group authenticate for request 0

rlm_eap: EAP Identity

rlm_eap: processing type tls

rlm_eap_tls: Initiate

rlm_eap_tls: Start returned 1

modcall[authenticate]: module "eap" returns handled for request 0

modcall: group authenticate returns handled for request 0

Sending Access-Challenge of id 1 to 192.168.0.50:1206

EAP-Message = 0x010200061920

Message-Authenticator = 0x00000000000000000000000000000000

State = 0x713cb94de2b4a5e048511f2af343ef3f

Finished request 0

Going to the next request

--- Walking the entire request list ---

Waking up in 6 seconds...

--- Walking the entire request list ---

Cleaning up request 0 ID 1 with timestamp 4234df20

Nothing to do. Sleeping until we see a request.

---------------------------------
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
--0-1881806822-1111647148=:72586
Content-Type: text/html; charset=us-ascii

<DIV>
<DIV>Hi,</DIV>
<DIV> </DIV>
<DIV>I fail to authenticate the windows xp client. Can anybody help?</DIV>
<DIV>Below are the related settings.</DIV>
<DIV> </DIV>
<DIV>In D-Link DWL-900AP+ </DIV>
<DIV>Authentication = WPA</DIV>
<DIV>WEP Encryption = 64bit</DIV>
<DIV>Key Type = Hex</DIV>
<DIV> </DIV>
<DIV>For Compex Wireless-G USB Adapter</DIV>
<DIV>Network Authentication = WPA</DIV>
<DIV>Data Encryption = TKIP</DIV>
<DIV><PRE>rad_recv: Access-Request packet from host 192.168.0.50:1206, id=1, length=135</PRE><PRE>        User-Name = "kschiam"</PRE><PRE>        NAS-IP-Address = 192.168.0.50</PRE><PRE>        NAS-Port = 0</PRE><PRE>        Called-Station-Id = "00-0F-3D-46-84-85"</PRE><PRE>        Calling-Station-Id = "00-06-F4-0A-92-34"</PRE><PRE>        NAS-Identifier =
"DWL-900AP+"</PRE><PRE>        Framed-MTU = 1380</PRE><PRE>        NAS-Port-Type = Wireless-802.11</PRE><PRE>        EAP-Message = 0x0201000c016b73636869616d</PRE><PRE>        Message-Authenticator = 0x0a48e074e852e068a66f1972614ad9d9</PRE><PRE>  Processing the authorize section of radiusd.conf</PRE><PRE>modcall: entering group authorize for request 0</PRE><PRE>  modcall[authorize]: module "preprocess" returns ok for request
0</PRE><PRE>  modcall[authorize]: module "mschap" returns noop for request 0</PRE><PRE>    rlm_realm: No '@' in User-Name = "kschiam", looking up realm NULL</PRE><PRE>    rlm_realm: No such realm "NULL"</PRE><PRE>  modcall[authorize]: module "suffix" returns noop for request 0</PRE><PRE>  rlm_eap: EAP packet type response id 1 length 12</PRE><PRE>  rlm_eap: No EAP Start, assuming it's an on-going EAP conversation</PRE><PRE>  modcall[authorize]: module "eap" returns updated for request
0</PRE><PRE>    users: Matched kschiam at 97</PRE><PRE>  modcall[authorize]: module "files" returns ok for request 0</PRE><PRE>modcall: group authorize returns updated for request 0</PRE><PRE>  rad_check_password:  Found Auth-Type EAP</PRE><PRE>auth: type "EAP"</PRE><PRE>  Processing the authenticate section of radiusd.conf</PRE><PRE>modcall: entering group authenticate for request 0</PRE><PRE>  rlm_eap: EAP Identity</PRE><PRE>  rlm_eap: processing ty
pe
tls</PRE><PRE>  rlm_eap_tls: Initiate</PRE><PRE>  rlm_eap_tls: Start returned 1</PRE><PRE>  modcall[authenticate]: module "eap" returns handled for request 0</PRE><PRE>modcall: group authenticate returns handled for request 0</PRE><PRE>Sending Access-Challenge of id 1 to 192.168.0.50:1206</PRE><PRE>        EAP-Message = 0x010200061920</PRE><PRE>        Message-Authenticator = 0x00000000000000000000000000000000</PRE><PRE>        State =
0x713cb94de2b4a5e048511f2af343ef3f</PRE><PRE>Finished request 0</PRE><PRE>Going to the next request</PRE><PRE>--- Walking the entire request list ---</PRE><PRE>Waking up in 6 seconds...</PRE><PRE>--- Walking the entire request list ---</PRE><PRE>Cleaning up request 0 ID 1 with timestamp 4234df20</PRE><PRE>Nothing to do.  Sleeping until we see a request.</PRE></DIV></DIV>
<hr size=1>Do you Yahoo!? 
Yahoo! Small Business - <a href="http://us.rd.yahoo.com/evt=31637/*http://smallbusiness.yahoo.com/resources/">Try our new resources site!</a>
--0-1881806822-1111647148=:72586--

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode