leap probléme

hi,
I have a problem on Freeradius 1.0.2.
I have two configuration:
1- PDA microsoft pocket PC ---> AP Cisco ---> Freeradius 1.0.2
2- PDA microsoft pocket PC 2003 ---> AP Cisco --> Freeradius 1.0.2

The configuration one functions without problem in EAP-LEAP.
An error on the configuration two saying to me that the request EAP is
not recognized whereas my configuration PDA is the same as that which
functions.
Have an idea ??
herewith the debug

DEBUG SOLUTION ONE ----> OK
rad_recv: Access-Request packet from host 200.0.110.200:21647, id=22,
length=134
User-Name = "interne"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0002.b3e1.534e"
Service-Type = Login-User
Message-Authenticator = 0x0dcf19abbdaed8fa099bd9090ce51cb8
EAP-Message = 0x0202000c01696e7465726e65
NAS-Port-Type = Wireless-802.11
NAS-Port = 227
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 30
modcall[authorize]: module "preprocess" returns ok for request 30
modcall[authorize]: module "chap" returns noop for request 30
modcall[authorize]: module "mschap" returns noop for request 30
rlm_realm: No '@' in User-Name = "interne", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 30
rlm_eap: EAP packet type response id 2 length 12
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 30
users: Matched entry interne at line 99
modcall[authorize]: module "files" returns ok for request 30
modcall: group authorize returns updated for request 30
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 30
rlm_eap: EAP Identity
rlm_eap: processing type leap
rlm_eap_leap: Stage 2
rlm_eap_leap: Issuing AP Challenge
rlm_eap_leap: Successfully initiated
modcall[authenticate]: module "eap" returns handled for request 30
modcall: group authenticate returns handled for request 30
Sending Access-Challenge of id 22 to 200.0.110.200:21647
EAP-Message = 0x01030017110100085783023ddd6fd37c696e7465726e65
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x434ed93c4c2ead59aaf5ee2be8776661
Finished request 30
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21647, id=23,
length=179
User-Name = "interne"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0002.b3e1.534e"
Service-Type = Login-User
Message-Authenticator = 0x614b20ae77549b698d6fe190920da0ce
EAP-Message =
0x0203002711010018602e7d34fec6d96d618c57176c86e4b9 558daaedcd5f8fe4696e7465726e65
NAS-Port-Type = Wireless-802.11
NAS-Port = 227
State = 0x434ed93c4c2ead59aaf5ee2be8776661
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 31
modcall[authorize]: module "preprocess" returns ok for request 31
modcall[authorize]: module "chap" returns noop for request 31
modcall[authorize]: module "mschap" returns noop for request 31
rlm_realm: No '@' in User-Name = "interne", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 31
rlm_eap: EAP packet type response id 3 length 39
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 31
users: Matched entry interne at line 99
modcall[authorize]: module "files" returns ok for request 31
modcall: group authorize returns updated for request 31
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 31
rlm_eap: Request found, released from the list
rlm_eap: EAP/leap
rlm_eap: processing type leap
rlm_eap_leap: Stage 4
rlm_eap_leap: NtChallengeResponse from AP is valid
rlm_eap: Underlying EAP-Type set EAP ID to 4
modcall[authenticate]: module "eap" returns ok for request 31
modcall: group authenticate returns ok for request 31
Sending Access-Challenge of id 23 to 200.0.110.200:21647
EAP-Message = 0x03040004
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x07329ecca5fa59a8c3ced0e46567536e
Finished request 31
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21647, id=24,
length=163
User-Name = "interne"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0002.b3e1.534e"
Service-Type = Login-User
Message-Authenticator = 0xd751613ff2715a837acdf5562ba9fa11
EAP-Message = 0x0104001711010008c390addbd5c3bd8f696e7465726e65
NAS-Port-Type = Wireless-802.11
NAS-Port = 227
State = 0x07329ecca5fa59a8c3ced0e46567536e
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 32
modcall[authorize]: module "preprocess" returns ok for request 32
modcall[authorize]: module "chap" returns noop for request 32
modcall[authorize]: module "mschap" returns noop for request 32
rlm_realm: No '@' in User-Name = "interne", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 32
rlm_eap: EAP packet type request id 4 length 23
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 32
users: Matched entry interne at line 99
modcall[authorize]: module "files" returns ok for request 32
modcall: group authorize returns updated for request 32
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 32
rlm_eap: Request found, released from the list
rlm_eap: EAP/leap
rlm_eap: processing type leap
rlm_eap_leap: Stage 6
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns handled for request 32
modcall: group authenticate returns handled for request 32
Sending Access-Accept of id 24 to 200.0.110.200:21647
Cisco-AVPair +=
"leap:session-key=\200\005\017c\321X|\017\314l\023L\251X=&\271u_ 4[\341\227\305\331\240P)'Y\270\242\377\321"
EAP-Message =
0x0205002711010018a2746a89b4e14592c211cb46e671e9b2 0bcd40d087967614696e7465726e65
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "interne"


DEBUG SOLUTION TWO ----> KO

rad_recv: Access-Request packet from host 200.0.110.200:21646, id=249,
length=173
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0xbe965e3e54ebf603218021b1ad239e19
EAP-Message =
0x0203002411010018d650481cc53131452c35ad2800e00afb 5819d1f074497c8b74657374
NAS-Port-Type = Wireless-802.11
NAS-Port = 217
State = 0x017e5bf07733f9422007480c49d9134f
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 3 length 36
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched entry test at line 105
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type eap
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/leap
rlm_eap: processing type leap
rlm_eap_leap: Stage 4
rlm_eap_leap: NtChallengeResponse from AP is valid
rlm_eap: Underlying EAP-Type set EAP ID to 4
modcall[authenticate]: module "eap" returns ok for request 1
modcall: group authenticate returns ok for request 1
Sending Access-Challenge of id 249 to 200.0.110.200:21646
EAP-Message = 0x03040004
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x5fe1da6a989f2c1a35b07c8e49e93004
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 200.0.110.200:21646, id=250,
length=157
User-Name = "test"
Framed-MTU = 1400
Called-Station-Id = "000d.eded.7584"
Calling-Station-Id = "0009.2d0e.04fa"
Service-Type = Login-User
Message-Authenticator = 0xf85391ce3d9ac66acef0bde8a8bf3fa4
EAP-Message = 0x010300141101000867935ad6df79f84674657374
NAS-Port-Type = Wireless-802.11
NAS-Port = 217
State = 0x5fe1da6a989f2c1a35b07c8e49e93004
NAS-IP-Address = 200.0.110.200
NAS-Identifier = "AP_Radius"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type request id 3 length 20
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched entry test at line 105
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type eap
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request not found in the list
rlm_eap: Either EAP-request timed out OR EAP-response to an unknown
EAP-request
rlm_eap: Failed in handler
modcall[authenticate]: module "eap" returns invalid for request 2
modcall: group authenticate returns invalid for request 2
auth: Failed to validate the user.
Delaying request 2 for 1 seconds
Finished request 2
Going to the next request

thank you for your assistance

Patrice PAPOT


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html