Running CGIs in Any Directory

I've installed Apache 1.2.38 on my Windows XP machine so that I can
more easily test sites before I release them. I've managed to get
Perl, PHP, and mySQL all working. However, I can only run Perl in the
cgi-bin directory, and I'd really like to be able to put them
anywhere. If I try to run a script in htdocs from my browser, it just
downloads it like a normal file (although it works fine in the
cgi-bin). I've done everything I can think of, but it still isn't
working. Here's my httpd.conf file right now:
(And yes, I have restarted the server after making changes.)


#
# Based upon the NCSA server configuration files originally by Rob
McCool.
#
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are
unsure
# consult the online docs. You have been warned.
#
# After this file is processed, the server will look for and process
# C:/Program Files/Apache Group/Apache/conf/srm.conf and then
C:/Program Files/Apache Group/Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
#
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server
process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default'
server,
# which responds to requests that aren't handled by a virtual
host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent
to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
#
# Configuration and logfile names: If the filenames you specify for
many
# of the server's control files begin with "/" (or "drive:/" for
Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by
the
# server as "/usr/local/apache/logs/foo.log".
#
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is
located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
#

### Section 1: Global Environment
#
# The directives in this section affect the overall operation of
Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
#

#
# ServerType is either inetd, or standalone. Inetd mode is only
supported on
# Unix platforms.
#
ServerType standalone

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
ServerRoot "C:/Program Files/Apache Group/Apache"

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
#
PidFile logs/httpd.pid

#
# ScoreBoardFile: File used to store internal server process
information.
# Not all architectures require this. But if yours does (you'll know
because
# this file will be created when you run Apache) then you *must*
ensure that
# no two invocations of Apache share the same scoreboard file.
#
ScoreBoardFile logs/apache_runtime_status

#
# In the standard configuration, the server will process httpd.conf
(this
# file, specified by the -f command line option), srm.conf, and
access.conf
# in that order. The latter two files are now distributed empty, as
it is
# recommended that all directives be kept in a single file for
simplicity.
# The commented-out values below are the built-in defaults. You can
have the
# server ignore these files altogether by using "/dev/null" (for Unix)
or
# "nul" (for Win32) for the arguments to the directives.
#
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive On

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited
amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request
from the
# same client on the same connection.
#
KeepAliveTimeout 15

#
# Apache on Win32 always creates one child process to handle requests.
If it
# dies, another child process is created automatically. Within the
child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
#

#
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems,
this
# isn't really needed, but a few (such as Solaris) do have notable
leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
#
# NOTE: This value does not include keepalive requests after the
initial
# request per connection. For example, if a child process
handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
#
MaxRequestsPerChild 0

#
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
#
ThreadsPerChild 50

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
#Listen 3000
#Listen 12.34.56.78:80

#
# BindAddress: You can support virtual hosts with this option. This
directive
# is used to tell the server which IP address to listen to. It can
either
# contain "*", an IP address, or a fully qualified Internet domain
name.
# See also the <VirtualHost> and Listen directives.
#
#BindAddress *

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a
DSO you
# have to place corresponding `LoadModule' lines at this location so
the
# directives contained in it are actually available _before_ they are
used.
# Please read the file README.DSO in the Apache 1.3 distribution for
more
# details about the DSO mechanism and run `apache -l' for the list of
already
# built-in (statically linked and thus always available) modules in
your Apache
# binary.
#
# Note: The order in which modules are loaded is important. Don't
change
# the order below without expert advice.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule status_module modules/mod_status.so
#LoadModule info_module modules/mod_info.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule rewrite_module modules/mod_rewrite.so
#LoadModule anon_auth_module modules/mod_auth_anon.so
#LoadModule dbm_auth_module modules/mod_auth_dbm.so
#LoadModule digest_auth_module modules/mod_auth_digest.so
#LoadModule digest_module modules/mod_digest.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule headers_module modules/mod_headers.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so

#
# Reconstruction of the complete module list from all available
modules
# (static and shared ones) to achieve correct module execution order.
#
# The modules listed below, without a corresponding LoadModule
directive,
# are static bound into the standard Apache binary distribution for
Windows.
#
# Note: The order in which modules are loaded is important. Don't
change
# the order below without expert advice.
#
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE, UPDATE THIS TOO!]
ClearModuleList
#AddModule mod_vhost_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
#AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_isapi.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
#AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule mod_auth_anon.c
#AddModule mod_auth_dbm.c
#AddModule mod_auth_digest.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule mod_cern_meta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
#AddModule mod_unique_id.c
AddModule mod_so.c
AddModule mod_setenvif.c


#
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information
(ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#
#ExtendedStatus On

### Section 2: 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# Port: The port to which the standalone server listens. Certain
firewall
# products must be configured before Apache can listen to a specific
port.
# Other running httpd servers will also interfere with this port.
Disable
# all firewall, security, and other services if you encounter
problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
#
Port 80

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
#
ServerAdmin me@ryanjahrman.com

#
# ServerName allows you to set a host name which is sent back to
clients for
# your server if it's different than the one the program would get
(i.e., use
# "www" instead of the host's real name).
#
# Note: You cannot just invent host names and hope they work. The name
you
# define here must be a valid DNS name for your host. If you don't
understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP
address here.
# You will have to access it by its address (e.g.,
http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
#
# 127.0.0.1 is the TCP/IP local loop-back address, often named
localhost. Your
# machine always knows itself by this address. If you use Apache
strictly for
# local testing and development, you may use 127.0.0.1 as the server
name.
#
ServerName localhost


#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory,
but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs"

#
# Each directory to which Apache has access, can be configured with
respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# First, we configure the "default" to be a very restrictive set of
# permissions.
#
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "C:/Program Files/Apache Group/Apache/htdocs">

#
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
#
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
#
Options Indexes FollowSymLinks MultiViews ExecCGI

#
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options",
"FileInfo",
# "AuthConfig", and "Limit"
#
AllowOverride None

#
# Controls who can get stuff from this server.
#
Order allow,deny
Allow from all
</Directory>

#
# UserDir: The name of the directory which is appended onto a user's
home
# directory if a ~user request is received.
#
# Under Win32, we do not currently try to determine the home directory
of
# a Windows login, so a format such as that below needs to be used.
See
# the UserDir documentation for details.
#
<IfModule mod_userdir.c>
UserDir "C:/Program Files/Apache Group/Apache/users/"
</IfModule>

#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
#<Directory "C:/Program Files/Apache Group/Apache/users">
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>

#
# DirectoryIndex: Name of the file or files to use as a pre-written
HTML
# directory index. Separate multiple entries with spaces.
#
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>

#
# AccessFileName: The name of the file to look for in each directory
# for access control information.
#
AccessFileName .htaccess

#
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
#
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</Files>

#
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
with each
# document that was negotiated on the basis of content. This asks
proxy
# servers not to cache the document. Uncommenting the following line
disables
# this behavior, and proxies will be allowed to cache the documents.
#
#CacheNegotiatedDocs

#
# UseCanonicalName: (new for 1.3) With this setting turned on,
whenever
# Apache needs to construct a self-referencing URL (a URL that refers
back
# to the server the response is coming from) it will use ServerName
and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
#
UseCanonicalName On

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>

#
# DefaultType is the default MIME type the server will use for a
document
# if it cannot otherwise determine one, such as from filename
extensions.
# If your server contains mostly text or HTML documents, "text/plain"
is
# a good value. If most of your content is binary, such as
applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints
from the
# contents of the file itself to determine its type. The
MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include
mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule>
container.
# This means that the MIMEMagicFile directive will only be processed
if the
# module is part of the server.
#
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>

#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if
people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to
the
# nameserver.
#
HostnameLookups Off

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a
<VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog logs/error.log

#
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
\"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# The location and format of the access logfile (Common Logfile
Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
CustomLog logs/access.log common

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent

#
# If you prefer a single logfile with access, agent, and referer
information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access.log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory
listings,
# mod_status and mod_info output etc., but not CGI generated
documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature On

#
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the
symbols
# pound (#) and exclamation (!) followed by the path of the program
that
# can execute this specific script. For a perl script, with perl.exe
in
# the C:\Program Files\Perl directory, the shebang line should be:

#!c:/program files/perl/perl

# Note you _must_not_ indent the actual shebang line, and it must be
the
# first line of the file. Of course, CGI processing must be enabled
by
# the appropriate ScriptAlias or Options ExecCGI directives for the
files
# or directory in question.
#
# However, Apache on Windows allows either the Unix behavior above, or
can
# use the Registry to match files by extention. The command to
execute
# a file of this type is retrieved from the registry by the same
method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer
View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the
Edit
# button allows you to modify the Actions, of which Apache 1.3
attempts to
# perform the 'Open' Action, and failing that it will try the shebang
line.
# This behavior is subject to change in Apache release 2.0.
#
# Each mechanism has it's own specific security weaknesses, from the
means
# to run a program you didn't intend the website owner to invoke, and
the
# best method is a matter of great debate.
#
# To enable the this Windows specific behavior (and therefore
-disable- the
# equivilant Unix behavior), uncomment the following directive:
#
#ScriptInterpreterSource registry
#
# The directive above can be placed in individual <Directory> blocks
or the
# .htaccess file, with either the 'registry' (Windows behavior) or
'script'
# (Unix behavior) option, and will override this server default
option.
#

#
# Aliases: Add here as many aliases as you need (with no limit). The
format is
# Alias fakename realname
#
<IfModule mod_alias.c>

#
# Note that if you include a trailing / on fakename then the
server will
# require it to be present in the URL. So "/icons" isn't aliased
in this
# example, only "/icons/". If the fakename is slash-terminated,
then the
# realname must also be slash terminated, and if the fakename
omits the
# trailing slash, the realname must also omit it.
#
Alias /icons/ "C:/Program Files/Apache Group/Apache/icons/"

<Directory "C:/Program Files/Apache Group/Apache/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

# This Alias will project the on-line documentation tree under
/manual/
# even if you change the DocumentRoot. Comment it if you don't
want to
# provide access to the on-line documentation.
#
Alias /manual/ "C:/Program Files/Apache
Group/Apache/htdocs/manual/"

<Directory "C:/Program Files/Apache Group/Apache/htdocs/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>

#
# ScriptAlias: This controls which directories contain server
scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications
and
# run by the server when requested rather than as documents sent
to the client.
# The same rules about trailing "/" apply to ScriptAlias
directives as to
# Alias.
#
ScriptAlias /cgi-bin/ "C:/Program Files/Apache
Group/Apache/cgi-bin/"

#
# "C:/Program Files/Apache Group/Apache/cgi-bin" should be changed
to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "C:/Program Files/Apache Group/Apache/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>

</IfModule>
# End of aliases.

#
# Redirect allows you to tell clients about documents which used to
exist in
# your server's namespace, but do not anymore. This allows you to tell
the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
#

#
# Directives controlling the display of server-generated directory
listings.
#
<IfModule mod_autoindex.c>

#
# FancyIndexing is whether you want fancy directory indexing or
standard
#
# Note, add the option TrackModified to the IndexOptions default
list only
# if all indexed directories reside on NTFS volumes. The
TrackModified flag
# will report the Last-Modified date to assist caches and proxies
to properly
# track directory changes, but it does _not_ work on FAT volumes.
#
IndexOptions FancyIndexing

#
# AddIcon* directives tell the server which icon to show for
different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
#
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

#
# DefaultIcon is which icon to show for files which do not have an
icon
# explicitly set.
#
DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a
file in
# server-generated indexes. These are only displayed for
FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

#
# ReadmeName is the name of the README file the server will look
for by
# default, and append to directory listings.
#
# HeaderName is the name of a file which should be prepended to
# directory indexes.
#
ReadmeName README
HeaderName HEADER

#
# IndexIgnore is a set of filenames which directory indexing
should ignore
# and not include in the listing. Shell-style wildcarding is
permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

</IfModule>
# End of indexing directives.

#
# Document types.
#
<IfModule mod_mime.c>

#
# AddType allows you to tweak mime.types without actually editing
it, or to
# make certain files to be certain types.
#
AddType application/x-tar .tgz

#
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have
nothing
# to do with the FancyIndexing customization directives above.
#
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
#
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz

#
# AddLanguage allows you to specify the language of a document.
You can
# then use content negotiation to give a browser a file in a
language
# it can understand.
#
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
#
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
#
# Note 3: In the case of 'ltz' we violate the RFC by using a three
char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
#
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
(nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
#
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8

# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
#
# Just list the languages in decreasing order of preference. We
have
# more or less alphabetized them here. You probably want to change
this.
#
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
ru ltz ca es sv tw
</IfModule>

#
# AddHandler allows you to map certain file extensions to
"handlers",
# actions unrelated to filetype. These can be either built into
the server
# or added with the Action command (see below)
#
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
#
# To use CGI scripts:
#
AddHandler cgi-script .cgi
AddHandler cgi-script .pl

#
# To use server-parsed HTML files
#
AddType text/html .shtml
AddHandler server-parsed .shtml

#
# Uncomment the following line to enable Apache's send-asis HTTP
file
# feature
#
#AddHandler send-as-is asis

#
# If you wish to use server-parsed imagemap files, use
#
#AddHandler imap-file map

#
# To enable type maps, you might want to use
#
#AddHandler type-map var

</IfModule>
# End of document types.

#
# Action lets you define media types that will execute a script
whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# MetaDir: specifies the name of the directory in which Apache can
find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#
#MetaDir .web

#
# MetaSuffix: specifies the file name suffix for the file containing
the
# meta information.
#
#MetaSuffix .meta

#
# Customizable error response (Apache style)
# these come in three flavors
#
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get
output
#
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using
server-side-includes.
#
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the
original
# request will *not* be available to such a script.

#
# Customize behaviour based on the browser
#
<IfModule mod_setenvif.c>

#
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and
browsers that
# spoof it. There are known problems with these browser
implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect)
responses.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
force-response-1.0

#
# The following directive disables HTTP/1.1 responses to browsers
which
# are in violation of the HTTP/1.0 spec by not being able to grok
a
# basic 1.1 response.
#
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

</IfModule>
# End of browser customization directives

#
# Allow server status reports, with the URL of
http://servername/server-status
# Change the "localhost" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from localhost
#</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the "localhost" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from localhost
#</Location>

#
# There have been reports of people trying to abuse an old bug from
pre-1.1
# days. This bug involved a CGI script distributed as a part of
Apache.
# By uncommenting these lines you can redirect these attacks to a
logging
# script on phf.apache.org. Or, you can record them yourself, using
the script
# support/phf_abuse_log.cgi.
#
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
# ProxyRequests On

# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from localhost
# </Directory>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing
Via: headers)
# Set to one of: Off | On | Full | Block
#
# ProxyVia On

#
# To enable the cache as well, edit and uncomment the following
lines:
# (no cacheing without CacheRoot)
#
# CacheRoot "C:/Program Files/Apache Group/Apache/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on
your
# machine you can setup VirtualHost containers for them. Most
configurations
# use only name-based virtual hosts so the server doesn't need to
worry about
# IP addresses. This is indicated by the asterisks in the directives
below.
#
# Please see the documentation at
<URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
#NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#
#<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>

LoadModule php4_module c:/php/sapi/php4apache.dll
AddType application/x-httpd-php .php .phtml

I guess you could modify the "ScriptAlias" entry to take "/" as executable
directory.
As far as I know, this property will descend to directories below (the rest
of your site)
as well


"Ryan" <rjahrman@yahoo.com> schrieb im Newsbeitrag
news:b4023a5a.0311091739.4d3dcea8@posting.google.c om...
> I've installed Apache 1.2.38 on my Windows XP machine so that I can
> more easily test sites before I release them. I've managed to get
> Perl, PHP, and mySQL all working. However, I can only run Perl in the
> cgi-bin directory, and I'd really like to be able to put them
> anywhere. If I try to run a script in htdocs from my browser, it just
> downloads it like a normal file (although it works fine in the
> cgi-bin). I've done everything I can think of, but it still isn't
> working. Here's my httpd.conf file right now:
> (And yes, I have restarted the server after making changes.)
>
>
> #
> # Based upon the NCSA server configuration files originally by Rob
> McCool.
> #
> # This is the main Apache server configuration file. It contains the
> # configuration directives that give the server its instructions.
> # See <URL:http://www.apache.org/docs/> for detailed information about
> # the directives.
> #
> # Do NOT simply read the instructions in here without understanding
> # what they do. They're here only as hints or reminders. If you are
> unsure
> # consult the online docs. You have been warned.
> #
> # After this file is processed, the server will look for and process
> # C:/Program Files/Apache Group/Apache/conf/srm.conf and then
> C:/Program Files/Apache Group/Apache/conf/access.conf
> # unless you have overridden these with ResourceConfig and/or
> # AccessConfig directives here.
> #
> # The configuration directives are grouped into three basic sections:
> # 1. Directives that control the operation of the Apache server
> process as a
> # whole (the 'global environment').
> # 2. Directives that define the parameters of the 'main' or 'default'
> server,
> # which responds to requests that aren't handled by a virtual
> host.
> # These directives also provide default values for the settings
> # of all virtual hosts.
> # 3. Settings for virtual hosts, which allow Web requests to be sent
> to
> # different IP addresses or hostnames and have them handled by the
> # same Apache server process.
> #
> # Configuration and logfile names: If the filenames you specify for
> many
> # of the server's control files begin with "/" (or "drive:/" for
> Win32), the
> # server will use that explicit path. If the filenames do *not* begin
> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
> # with ServerRoot set to "/usr/local/apache" will be interpreted by
> the
> # server as "/usr/local/apache/logs/foo.log".
> #
> # NOTE: Where filenames are specified, you must use forward slashes
> # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
> # If a drive letter is omitted, the drive on which Apache.exe is
> located
> # will be used by default. It is recommended that you always supply
> # an explicit drive letter in absolute paths, however, to avoid
> # confusion.
> #
>
> ### Section 1: Global Environment
> #
> # The directives in this section affect the overall operation of
> Apache,
> # such as the number of concurrent requests it can handle or where it
> # can find its configuration files.
> #
>
> #
> # ServerType is either inetd, or standalone. Inetd mode is only
> supported on
> # Unix platforms.
> #
> ServerType standalone
>
> #
> # ServerRoot: The top of the directory tree under which the server's
> # configuration, error, and log files are kept.
> #
> ServerRoot "C:/Program Files/Apache Group/Apache"
>
> #
> # PidFile: The file in which the server should record its process
> # identification number when it starts.
> #
> PidFile logs/httpd.pid
>
> #
> # ScoreBoardFile: File used to store internal server process
> information.
> # Not all architectures require this. But if yours does (you'll know
> because
> # this file will be created when you run Apache) then you *must*
> ensure that
> # no two invocations of Apache share the same scoreboard file.
> #
> ScoreBoardFile logs/apache_runtime_status
>
> #
> # In the standard configuration, the server will process httpd.conf
> (this
> # file, specified by the -f command line option), srm.conf, and
> access.conf
> # in that order. The latter two files are now distributed empty, as
> it is
> # recommended that all directives be kept in a single file for
> simplicity.
> # The commented-out values below are the built-in defaults. You can
> have the
> # server ignore these files altogether by using "/dev/null" (for Unix)
> or
> # "nul" (for Win32) for the arguments to the directives.
> #
> #ResourceConfig conf/srm.conf
> #AccessConfig conf/access.conf
>
> #
> # Timeout: The number of seconds before receives and sends time out.
> #
> Timeout 300
>
> #
> # KeepAlive: Whether or not to allow persistent connections (more than
> # one request per connection). Set to "Off" to deactivate.
> #
> KeepAlive On
>
> #
> # MaxKeepAliveRequests: The maximum number of requests to allow
> # during a persistent connection. Set to 0 to allow an unlimited
> amount.
> # We recommend you leave this number high, for maximum performance.
> #
> MaxKeepAliveRequests 100
>
> #
> # KeepAliveTimeout: Number of seconds to wait for the next request
> from the
> # same client on the same connection.
> #
> KeepAliveTimeout 15
>
> #
> # Apache on Win32 always creates one child process to handle requests.
> If it
> # dies, another child process is created automatically. Within the
> child
> # process multiple threads handle incoming requests. The next two
> # directives control the behaviour of the threads and processes.
> #
>
> #
> # MaxRequestsPerChild: the number of requests each child process is
> # allowed to process before the child dies. The child will exit so
> # as to avoid problems after prolonged use when Apache (and maybe the
> # libraries it uses) leak memory or other resources. On most systems,
> this
> # isn't really needed, but a few (such as Solaris) do have notable
> leaks
> # in the libraries. For Win32, set this value to zero (unlimited)
> # unless advised otherwise.
> #
> # NOTE: This value does not include keepalive requests after the
> initial
> # request per connection. For example, if a child process
> handles
> # an initial request and 10 subsequent "keptalive" requests, it
> # would only count as 1 request towards this limit.
> #
> MaxRequestsPerChild 0
>
> #
> # Number of concurrent threads (i.e., requests) the server will allow.
> # Set this value according to the responsiveness of the server (more
> # requests active at once means they're all handled more slowly) and
> # the amount of system resources you'll allow the server to consume.
> #
> ThreadsPerChild 50
>
> #
> # Listen: Allows you to bind Apache to specific IP addresses and/or
> # ports, instead of the default. See also the <VirtualHost>
> # directive.
> #
> #Listen 3000
> #Listen 12.34.56.78:80
>
> #
> # BindAddress: You can support virtual hosts with this option. This
> directive
> # is used to tell the server which IP address to listen to. It can
> either
> # contain "*", an IP address, or a fully qualified Internet domain
> name.
> # See also the <VirtualHost> and Listen directives.
> #
> #BindAddress *
>
> #
> # Dynamic Shared Object (DSO) Support
> #
> # To be able to use the functionality of a module which was built as a
> DSO you
> # have to place corresponding `LoadModule' lines at this location so
> the
> # directives contained in it are actually available _before_ they are
> used.
> # Please read the file README.DSO in the Apache 1.3 distribution for
> more
> # details about the DSO mechanism and run `apache -l' for the list of
> already
> # built-in (statically linked and thus always available) modules in
> your Apache
> # binary.
> #
> # Note: The order in which modules are loaded is important. Don't
> change
> # the order below without expert advice.
> #
> # Example:
> # LoadModule foo_module modules/mod_foo.so
> #
> #LoadModule vhost_alias_module modules/mod_vhost_alias.so
> #LoadModule mime_magic_module modules/mod_mime_magic.so
> #LoadModule status_module modules/mod_status.so
> #LoadModule info_module modules/mod_info.so
> #LoadModule speling_module modules/mod_speling.so
> #LoadModule rewrite_module modules/mod_rewrite.so
> #LoadModule anon_auth_module modules/mod_auth_anon.so
> #LoadModule dbm_auth_module modules/mod_auth_dbm.so
> #LoadModule digest_auth_module modules/mod_auth_digest.so
> #LoadModule digest_module modules/mod_digest.so
> #LoadModule proxy_module modules/mod_proxy.so
> #LoadModule cern_meta_module modules/mod_cern_meta.so
> #LoadModule expires_module modules/mod_expires.so
> #LoadModule headers_module modules/mod_headers.so
> #LoadModule usertrack_module modules/mod_usertrack.so
> #LoadModule unique_id_module modules/mod_unique_id.so
>
> #
> # Reconstruction of the complete module list from all available
> modules
> # (static and shared ones) to achieve correct module execution order.
> #
> # The modules listed below, without a corresponding LoadModule
> directive,
> # are static bound into the standard Apache binary distribution for
> Windows.
> #
> # Note: The order in which modules are loaded is important. Don't
> change
> # the order below without expert advice.
> #
> # [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE, UPDATE THIS TOO!]
> ClearModuleList
> #AddModule mod_vhost_alias.c
> AddModule mod_env.c
> AddModule mod_log_config.c
> #AddModule mod_mime_magic.c
> AddModule mod_mime.c
> AddModule mod_negotiation.c
> #AddModule mod_status.c
> #AddModule mod_info.c
> AddModule mod_include.c
> AddModule mod_autoindex.c
> AddModule mod_dir.c
> AddModule mod_isapi.c
> AddModule mod_cgi.c
> AddModule mod_asis.c
> AddModule mod_imap.c
> AddModule mod_actions.c
> #AddModule mod_speling.c
> AddModule mod_userdir.c
> AddModule mod_alias.c
> #AddModule mod_rewrite.c
> AddModule mod_access.c
> AddModule mod_auth.c
> #AddModule mod_auth_anon.c
> #AddModule mod_auth_dbm.c
> #AddModule mod_auth_digest.c
> #AddModule mod_digest.c
> #AddModule mod_proxy.c
> #AddModule mod_cern_meta.c
> #AddModule mod_expires.c
> #AddModule mod_headers.c
> #AddModule mod_usertrack.c
> #AddModule mod_unique_id.c
> AddModule mod_so.c
> AddModule mod_setenvif.c
>
>
> #
> # ExtendedStatus controls whether Apache will generate "full" status
> # information (ExtendedStatus On) or just basic information
> (ExtendedStatus
> # Off) when the "server-status" handler is called. The default is Off.
> #
> #ExtendedStatus On
>
> ### Section 2: 'Main' server configuration
> #
> # The directives in this section set up the values used by the 'main'
> # server, which responds to any requests that aren't handled by a
> # <VirtualHost> definition. These values also provide defaults for
> # any <VirtualHost> containers you may define later in the file.
> #
> # All of these directives may appear inside <VirtualHost> containers,
> # in which case these default settings will be overridden for the
> # virtual host being defined.
> #
>
> #
> # Port: The port to which the standalone server listens. Certain
> firewall
> # products must be configured before Apache can listen to a specific
> port.
> # Other running httpd servers will also interfere with this port.
> Disable
> # all firewall, security, and other services if you encounter
> problems.
> # To help diagnose problems use the Windows NT command NETSTAT -a
> #
> Port 80
>
> #
> # ServerAdmin: Your address, where problems with the server should be
> # e-mailed. This address appears on some server-generated pages, such
> # as error documents.
> #
> ServerAdmin me@ryanjahrman.com
>
> #
> # ServerName allows you to set a host name which is sent back to
> clients for
> # your server if it's different than the one the program would get
> (i.e., use
> # "www" instead of the host's real name).
> #
> # Note: You cannot just invent host names and hope they work. The name
> you
> # define here must be a valid DNS name for your host. If you don't
> understand
> # this, ask your network administrator.
> # If your host doesn't have a registered DNS name, enter its IP
> address here.
> # You will have to access it by its address (e.g.,
> http://123.45.67.89/)
> # anyway, and this will make redirections work in a sensible way.
> #
> # 127.0.0.1 is the TCP/IP local loop-back address, often named
> localhost. Your
> # machine always knows itself by this address. If you use Apache
> strictly for
> # local testing and development, you may use 127.0.0.1 as the server
> name.
> #
> ServerName localhost
>
>
> #
> # DocumentRoot: The directory out of which you will serve your
> # documents. By default, all requests are taken from this directory,
> but
> # symbolic links and aliases may be used to point to other locations.
> #
> DocumentRoot "C:/Program Files/Apache Group/Apache/htdocs"
>
> #
> # Each directory to which Apache has access, can be configured with
> respect
> # to which services and features are allowed and/or disabled in that
> # directory (and its subdirectories).
> #
> # First, we configure the "default" to be a very restrictive set of
> # permissions.
> #
> <Directory />
> Options FollowSymLinks
> AllowOverride None
> </Directory>
>
> #
> # Note that from this point forward you must specifically allow
> # particular features to be enabled - so if something's not working as
> # you might expect, make sure that you have specifically enabled it
> # below.
> #
>
> #
> # This should be changed to whatever you set DocumentRoot to.
> #
> <Directory "C:/Program Files/Apache Group/Apache/htdocs">
>
> #
> # This may also be "None", "All", or any combination of "Indexes",
> # "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
> #
> # Note that "MultiViews" must be named *explicitly* --- "Options All"
> # doesn't give it to you.
> #
> Options Indexes FollowSymLinks MultiViews ExecCGI
>
> #
> # This controls which options the .htaccess files in directories can
> # override. Can also be "All", or any combination of "Options",
> "FileInfo",
> # "AuthConfig", and "Limit"
> #
> AllowOverride None
>
> #
> # Controls who can get stuff from this server.
> #
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # UserDir: The name of the directory which is appended onto a user's
> home
> # directory if a ~user request is received.
> #
> # Under Win32, we do not currently try to determine the home directory
> of
> # a Windows login, so a format such as that below needs to be used.
> See
> # the UserDir documentation for details.
> #
> <IfModule mod_userdir.c>
> UserDir "C:/Program Files/Apache Group/Apache/users/"
> </IfModule>
>
> #
> # Control access to UserDir directories. The following is an example
> # for a site where these directories are restricted to read-only.
> #
> #<Directory "C:/Program Files/Apache Group/Apache/users">
> # AllowOverride FileInfo AuthConfig Limit
> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
> # <Limit GET POST OPTIONS PROPFIND>
> # Order allow,deny
> # Allow from all
> # </Limit>
> # <LimitExcept GET POST OPTIONS PROPFIND>
> # Order deny,allow
> # Deny from all
> # </LimitExcept>
> #</Directory>
>
> #
> # DirectoryIndex: Name of the file or files to use as a pre-written
> HTML
> # directory index. Separate multiple entries with spaces.
> #
> <IfModule mod_dir.c>
> DirectoryIndex index.html
> </IfModule>
>
> #
> # AccessFileName: The name of the file to look for in each directory
> # for access control information.
> #
> AccessFileName .htaccess
>
> #
> # The following lines prevent .htaccess files from being viewed by
> # Web clients. Since .htaccess files often contain authorization
> # information, access is disallowed for security reasons. Comment
> # these lines out if you want Web visitors to see the contents of
> # .htaccess files. If you change the AccessFileName directive above,
> # be sure to make the corresponding changes here.
> #
> # Also, folks tend to use names such as .htpasswd for password
> # files, so this will protect those as well.
> #
> <Files ~ "^\.ht">
> Order allow,deny
> Deny from all
> Satisfy All
> </Files>
>
> #
> # CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache"
> with each
> # document that was negotiated on the basis of content. This asks
> proxy
> # servers not to cache the document. Uncommenting the following line
> disables
> # this behavior, and proxies will be allowed to cache the documents.
> #
> #CacheNegotiatedDocs
>
> #
> # UseCanonicalName: (new for 1.3) With this setting turned on,
> whenever
> # Apache needs to construct a self-referencing URL (a URL that refers
> back
> # to the server the response is coming from) it will use ServerName
> and
> # Port to form a "canonical" name. With this setting off, Apache will
> # use the hostname:port that the client supplied, when possible. This
> # also affects SERVER_NAME and SERVER_PORT in CGI scripts.
> #
> UseCanonicalName On
>
> #
> # TypesConfig describes where the mime.types file (or equivalent) is
> # to be found.
> #
> <IfModule mod_mime.c>
> TypesConfig conf/mime.types
> </IfModule>
>
> #
> # DefaultType is the default MIME type the server will use for a
> document
> # if it cannot otherwise determine one, such as from filename
> extensions.
> # If your server contains mostly text or HTML documents, "text/plain"
> is
> # a good value. If most of your content is binary, such as
> applications
> # or images, you may want to use "application/octet-stream" instead to
> # keep browsers from trying to display binary files as though they are
> # text.
> #
> DefaultType text/plain
>
> #
> # The mod_mime_magic module allows the server to use various hints
> from the
> # contents of the file itself to determine its type. The
> MIMEMagicFile
> # directive tells the module where the hint definitions are located.
> # mod_mime_magic is not part of the default server (you have to add
> # it yourself with a LoadModule [see the DSO paragraph in the 'Global
> # Environment' section], or recompile the server and include
> mod_mime_magic
> # as part of the configuration), so it's enclosed in an <IfModule>
> container.
> # This means that the MIMEMagicFile directive will only be processed
> if the
> # module is part of the server.
> #
> <IfModule mod_mime_magic.c>
> MIMEMagicFile conf/magic
> </IfModule>
>
> #
> # HostnameLookups: Log the names of clients or just their IP addresses
> # e.g., www.apache.org (on) or 204.62.129.132 (off).
> # The default is off because it'd be overall better for the net if
> people
> # had to knowingly turn this feature on, since enabling it means that
> # each client request will result in AT LEAST one lookup request to
> the
> # nameserver.
> #
> HostnameLookups Off
>
> #
> # ErrorLog: The location of the error log file.
> # If you do not specify an ErrorLog directive within a <VirtualHost>
> # container, error messages relating to that virtual host will be
> # logged here. If you *do* define an error logfile for a
> <VirtualHost>
> # container, that host's errors will be logged there and not here.
> #
> ErrorLog logs/error.log
>
> #
> # LogLevel: Control the number of messages logged to the error.log.
> # Possible values include: debug, info, notice, warn, error, crit,
> # alert, emerg.
> #
> LogLevel warn
>
> #
> # The fllowing directives define some format nicknames for use with
> # a CustomLog directive (see below).
> #
> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
> \"%{User-Agent}i\"" combined
> LogFormat "%h %l %u %t \"%r\" %>s %b" common
> LogFormat "%{Referer}i -> %U" referer
> LogFormat "%{User-agent}i" agent
>
> #
> # The location and format of the access logfile (Common Logfile
> Format).
> # If you do not define any access logfiles within a <VirtualHost>
> # container, they will be logged here. Contrariwise, if you *do*
> # define per-<VirtualHost> access logfiles, transactions will be
> # logged therein and *not* in this file.
> #
> CustomLog logs/access.log common
>
> #
> # If you would like to have agent and referer logfiles, uncomment the
> # following directives.
> #
> #CustomLog logs/referer.log referer
> #CustomLog logs/agent.log agent
>
> #
> # If you prefer a single logfile with access, agent, and referer
> information
> # (Combined Logfile Format) you can use the following directive.
> #
> #CustomLog logs/access.log combined
>
> #
> # Optionally add a line containing the server version and virtual host
> # name to server-generated pages (error documents, FTP directory
> listings,
> # mod_status and mod_info output etc., but not CGI generated
> documents).
> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
> # Set to one of: On | Off | EMail
> #
> ServerSignature On
>
> #
> # Apache parses all CGI scripts for the shebang line by default.
> # This comment line, the first line of the script, consists of the
> symbols
> # pound (#) and exclamation (!) followed by the path of the program
> that
> # can execute this specific script. For a perl script, with perl.exe
> in
> # the C:\Program Files\Perl directory, the shebang line should be:
>
> #!c:/program files/perl/perl
>
> # Note you _must_not_ indent the actual shebang line, and it must be
> the
> # first line of the file. Of course, CGI processing must be enabled
> by
> # the appropriate ScriptAlias or Options ExecCGI directives for the
> files
> # or directory in question.
> #
> # However, Apache on Windows allows either the Unix behavior above, or
> can
> # use the Registry to match files by extention. The command to
> execute
> # a file of this type is retrieved from the registry by the same
> method as
> # the Windows Explorer would use to handle double-clicking on a file.
> # These script actions can be configured from the Windows Explorer
> View menu,
> # 'Folder Options', and reviewing the 'File Types' tab. Clicking the
> Edit
> # button allows you to modify the Actions, of which Apache 1.3
> attempts to
> # perform the 'Open' Action, and failing that it will try the shebang
> line.
> # This behavior is subject to change in Apache release 2.0.
> #
> # Each mechanism has it's own specific security weaknesses, from the
> means
> # to run a program you didn't intend the website owner to invoke, and
> the
> # best method is a matter of great debate.
> #
> # To enable the this Windows specific behavior (and therefore
> -disable- the
> # equivilant Unix behavior), uncomment the following directive:
> #
> #ScriptInterpreterSource registry
> #
> # The directive above can be placed in individual <Directory> blocks
> or the
> # .htaccess file, with either the 'registry' (Windows behavior) or
> 'script'
> # (Unix behavior) option, and will override this server default
> option.
> #
>
> #
> # Aliases: Add here as many aliases as you need (with no limit). The
> format is
> # Alias fakename realname
> #
> <IfModule mod_alias.c>
>
> #
> # Note that if you include a trailing / on fakename then the
> server will
> # require it to be present in the URL. So "/icons" isn't aliased
> in this
> # example, only "/icons/". If the fakename is slash-terminated,
> then the
> # realname must also be slash terminated, and if the fakename
> omits the
> # trailing slash, the realname must also omit it.
> #
> Alias /icons/ "C:/Program Files/Apache Group/Apache/icons/"
>
> <Directory "C:/Program Files/Apache Group/Apache/icons">
> Options Indexes MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> # This Alias will project the on-line documentation tree under
> /manual/
> # even if you change the DocumentRoot. Comment it if you don't
> want to
> # provide access to the on-line documentation.
> #
> Alias /manual/ "C:/Program Files/Apache
> Group/Apache/htdocs/manual/"
>
> <Directory "C:/Program Files/Apache Group/Apache/htdocs/manual">
> Options Indexes FollowSymlinks MultiViews
> AllowOverride None
> Order allow,deny
> Allow from all
> </Directory>
>
> #
> # ScriptAlias: This controls which directories contain server
> scripts.
> # ScriptAliases are essentially the same as Aliases, except that
> # documents in the realname directory are treated as applications
> and
> # run by the server when requested rather than as documents sent
> to the client.
> # The same rules about trailing "/" apply to ScriptAlias
> directives as to
> # Alias.
> #
> ScriptAlias /cgi-bin/ "C:/Program Files/Apache
> Group/Apache/cgi-bin/"
>
> #
> # "C:/Program Files/Apache Group/Apache/cgi-bin" should be changed
> to whatever your ScriptAliased
> # CGI directory exists, if you have that configured.
> #
> <Directory "C:/Program Files/Apache Group/Apache/cgi-bin">
> AllowOverride None
> Options None
> Order allow,deny
> Allow from all
> </Directory>
>
> </IfModule>
> # End of aliases.
>
> #
> # Redirect allows you to tell clients about documents which used to
> exist in
> # your server's namespace, but do not anymore. This allows you to tell
> the
> # clients where to look for the relocated document.
> # Format: Redirect old-URI new-URL
> #
>
> #
> # Directives controlling the display of server-generated directory
> listings.
> #
> <IfModule mod_autoindex.c>
>
> #
> # FancyIndexing is whether you want fancy directory indexing or
> standard
> #
> # Note, add the option TrackModified to the IndexOptions default
> list only
> # if all indexed directories reside on NTFS volumes. The
> TrackModified flag
> # will report the Last-Modified date to assist caches and proxies
> to properly
> # track directory changes, but it does _not_ work on FAT volumes.
> #
> IndexOptions FancyIndexing
>
> #
> # AddIcon* directives tell the server which icon to show for
> different
> # files or filename extensions. These are only displayed for
> # FancyIndexed directories.
> #
> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>
> AddIconByType (TXT,/icons/text.gif) text/*
> AddIconByType (IMG,/icons/image2.gif) image/*
> AddIconByType (SND,/icons/sound2.gif) audio/*
> AddIconByType (VID,/icons/movie.gif) video/*
>
> AddIcon /icons/binary.gif .bin .exe
> AddIcon /icons/binhex.gif .hqx
> AddIcon /icons/tar.gif .tar
> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
> AddIcon /icons/a.gif .ps .ai .eps
> AddIcon /icons/layout.gif .html .shtml .htm .pdf
> AddIcon /icons/text.gif .txt
> AddIcon /icons/c.gif .c
> AddIcon /icons/p.gif .pl .py
> AddIcon /icons/f.gif .for
> AddIcon /icons/dvi.gif .dvi
> AddIcon /icons/uuencoded.gif .uu
> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
> AddIcon /icons/tex.gif .tex
> AddIcon /icons/bomb.gif core
>
> AddIcon /icons/back.gif ..
> AddIcon /icons/hand.right.gif README
> AddIcon /icons/folder.gif ^^DIRECTORY^^
> AddIcon /icons/blank.gif ^^BLANKICON^^
>
> #
> # DefaultIcon is which icon to show for files which do not have an
> icon
> # explicitly set.
> #
> DefaultIcon /icons/unknown.gif
>
> #
> # AddDescription allows you to place a short description after a
> file in
> # server-generated indexes. These are only displayed for
> FancyIndexed
> # directories.
> # Format: AddDescription "description" filename
> #
> #AddDescription "GZIP compressed document" .gz
> #AddDescription "tar archive" .tar
> #AddDescription "GZIP compressed tar archive" .tgz
>
> #
> # ReadmeName is the name of the README file the server will look
> for by
> # default, and append to directory listings.
> #
> # HeaderName is the name of a file which should be prepended to
> # directory indexes.
> #
> ReadmeName README
> HeaderName HEADER
>
> #
> # IndexIgnore is a set of filenames which directory indexing
> should ignore
> # and not include in the listing. Shell-style wildcarding is
> permitted.
> #
> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>
> </IfModule>
> # End of indexing directives.
>
> #
> # Document types.
> #
> <IfModule mod_mime.c>
>
> #
> # AddType allows you to tweak mime.types without actually editing
> it, or to
> # make certain files to be certain types.
> #
> AddType application/x-tar .tgz
>
> #
> # AddEncoding allows you to have certain browsers uncompress
> # information on the fly. Note: Not all browsers support this.
> # Despite the name similarity, the following Add* directives have
> nothing
> # to do with the FancyIndexing customization directives above.
> #
> AddEncoding x-compress .Z
> AddEncoding x-gzip .gz .tgz
> #
> # If the AddEncoding directives above are commented-out, then you
> # probably should define those extensions to indicate media types:
> #
> #AddType application/x-compress .Z
> #AddType application/x-gzip .gz .tgz
>
> #
> # AddLanguage allows you to specify the language of a document.
> You can
> # then use content negotiation to give a browser a file in a
> language
> # it can understand.
> #
> # Note 1: The suffix does not have to be the same as the language
> # keyword --- those with documents in Polish (whose net-standard
> # language code is pl) may wish to use "AddLanguage pl .po" to
> # avoid the ambiguity with the common suffix for perl scripts.
> #
> # Note 2: The example entries below illustrate that in quite
> # some cases the two character 'Language' abbreviation is not
> # identical to the two character 'Country' code for its country,
> # E.g. 'Danmark/dk' versus 'Danish/da'.
> #
> # Note 3: In the case of 'ltz' we violate the RFC by using a three
> char
> # specifier. But there is 'work in progress' to fix this and get
> # the reference data for rfc1766 cleaned up.
> #
> # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
> # French (fr) - German (de) - Greek-Modern (el)
> # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk
> (nn)
> # Portugese (pt) - Luxembourgeois* (ltz)
> # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
> # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
> # Russian (ru)
> #
> AddLanguage da .dk
> AddLanguage nl .nl
> AddLanguage en .en
> AddLanguage et .ee
> AddLanguage fr .fr
> AddLanguage de .de
> AddLanguage el .el
> AddLanguage he .he
> AddCharset ISO-8859-8 .iso8859-8
> AddLanguage it .it
> AddLanguage ja .ja
> AddCharset ISO-2022-JP .jis
> AddLanguage kr .kr
> AddCharset ISO-2022-KR .iso-kr
> AddLanguage nn .nn
> AddLanguage no .no
> AddLanguage pl .po
> AddCharset ISO-8859-2 .iso-pl
> AddLanguage pt .pt
> AddLanguage pt-br .pt-br
> AddLanguage ltz .lu
> AddLanguage ca .ca
> AddLanguage es .es
> AddLanguage sv .sv
> AddLanguage cs .cz .cs
> AddLanguage ru .ru
> AddLanguage zh-TW .zh-tw
> AddCharset Big5 .Big5 .big5
> AddCharset WINDOWS-1251 .cp-1251
> AddCharset CP866 .cp866
> AddCharset ISO-8859-5 .iso-ru
> AddCharset KOI8-R .koi8-r
> AddCharset UCS-2 .ucs2
> AddCharset UCS-4 .ucs4
> AddCharset UTF-8 .utf8
>
> # LanguagePriority allows you to give precedence to some languages
> # in case of a tie during content negotiation.
> #
> # Just list the languages in decreasing order of preference. We
> have
> # more or less alphabetized them here. You probably want to change
> this.
> #
> <IfModule mod_negotiation.c>
> LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br
> ru ltz ca es sv tw
> </IfModule>
>
> #
> # AddHandler allows you to map certain file extensions to
> "handlers",
> # actions unrelated to filetype. These can be either built into
> the server
> # or added with the Action command (see below)
> #
> # If you want to use server side includes, or CGI outside
> # ScriptAliased directories, uncomment the following lines.
> #
> # To use CGI scripts:
> #
> AddHandler cgi-script .cgi
> AddHandler cgi-script .pl
>
> #
> # To use server-parsed HTML files
> #
> AddType text/html .shtml
> AddHandler server-parsed .shtml
>
> #
> # Uncomment the following line to enable Apache's send-asis HTTP
> file
> # feature
> #
> #AddHandler send-as-is asis
>
> #
> # If you wish to use server-parsed imagemap files, use
> #
> #AddHandler imap-file map
>
> #
> # To enable type maps, you might want to use
> #
> #AddHandler type-map var
>
> </IfModule>
> # End of document types.
>
> #
> # Action lets you define media types that will execute a script
> whenever
> # a matching file is called. This eliminates the need for repeated URL
> # pathnames for oft-used CGI file processors.
> # Format: Action media/type /cgi-script/location
> # Format: Action handler-name /cgi-script/location
> #
>
> #
> # MetaDir: specifies the name of the directory in which Apache can
> find
> # meta information files. These files contain additional HTTP headers
> # to include when sending the document
> #
> #MetaDir .web
>
> #
> # MetaSuffix: specifies the file name suffix for the file containing
> the
> # meta information.
> #
> #MetaSuffix .meta
>
> #
> # Customizable error response (Apache style)
> # these come in three flavors
> #
> # 1) plain text
> #ErrorDocument 500 "The server made a boo boo.
> # n.b. the single leading (") marks it as text, it does not get
> output
> #
> # 2) local redirects
> #ErrorDocument 404 /missing.html
> # to redirect to local URL /missing.html
> #ErrorDocument 404 /cgi-bin/missing_handler.pl
> # N.B.: You can redirect to a script or a document using
> server-side-includes.
> #
> # 3) external redirects
> #ErrorDocument 402 http://some.other-server.com/subscription_info.html
> # N.B.: Many of the environment variables associated with the
> original
> # request will *not* be available to such a script.
>
> #
> # Customize behaviour based on the browser
> #
> <IfModule mod_setenvif.c>
>
> #
> # The following directives modify normal HTTP response behavior.
> # The first directive disables keepalive for Netscape 2.x and
> browsers that
> # spoof it. There are known problems with these browser
> implementations.
> # The second directive is for Microsoft Internet Explorer 4.0b2
> # which has a broken HTTP/1.1 implementation and does not properly
> # support keepalive when it is used on 301 or 302 (redirect)
> responses.
> #
> BrowserMatch "Mozilla/2" nokeepalive
> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0
> force-response-1.0
>
> #
> # The following directive disables HTTP/1.1 responses to browsers
> which
> # are in violation of the HTTP/1.0 spec by not being able to grok
> a
> # basic 1.1 response.
> #
> BrowserMatch "RealPlayer 4\.0" force-response-1.0
> BrowserMatch "Java/1\.0" force-response-1.0
> BrowserMatch "JDK/1\.0" force-response-1.0
>
> </IfModule>
> # End of browser customization directives
>
> #
> # Allow server status reports, with the URL of
> http://servername/server-status
> # Change the "localhost" to match your domain to enable.
> #
> #<Location /server-status>
> # SetHandler server-status
> # Order deny,allow
> # Deny from all
> # Allow from localhost
> #</Location>
>
> #
> # Allow remote server configuration reports, with the URL of
> # http://servername/server-info (requires that mod_info.c be loaded).
> # Change the "localhost" to match your domain to enable.
> #
> #<Location /server-info>
> # SetHandler server-info
> # Order deny,allow
> # Deny from all
> # Allow from localhost
> #</Location>
>
> #
> # There have been reports of people trying to abuse an old bug from
> pre-1.1
> # days. This bug involved a CGI script distributed as a part of
> Apache.
> # By uncommenting these lines you can redirect these attacks to a
> logging
> # script on phf.apache.org. Or, you can record them yourself, using
> the script
> # support/phf_abuse_log.cgi.
> #
> #<Location /cgi-bin/phf*>
> # Deny from all
> # ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
> #</Location>
>
> #
> # Proxy Server directives. Uncomment the following lines to
> # enable the proxy server:
> #
> #<IfModule mod_proxy.c>
> # ProxyRequests On
>
> # <Directory proxy:*>
> # Order deny,allow
> # Deny from all
> # Allow from localhost
> # </Directory>
>
> #
> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
> # ("Full" adds the server version; "Block" removes all outgoing
> Via: headers)
> # Set to one of: Off | On | Full | Block
> #
> # ProxyVia On
>
> #
> # To enable the cache as well, edit and uncomment the following
> lines:
> # (no cacheing without CacheRoot)
> #
> # CacheRoot "C:/Program Files/Apache Group/Apache/proxy"
> # CacheSize 5
> # CacheGcInterval 4
> # CacheMaxExpire 24
> # CacheLastModifiedFactor 0.1
> # CacheDefaultExpire 1
> # NoCache a-domain.com another-domain.edu joes.garage-sale.com
>
> #</IfModule>
> # End of proxy directives.
>
> ### Section 3: Virtual Hosts
> #
> # VirtualHost: If you want to maintain multiple domains/hostnames on
> your
> # machine you can setup VirtualHost containers for them. Most
> configurations
> # use only name-based virtual hosts so the server doesn't need to
> worry about
> # IP addresses. This is indicated by the asterisks in the directives
> below.
> #
> # Please see the documentation at
> <URL:http://www.apache.org/docs/vhosts/>
> # for further details before you try to setup virtual hosts.
> #
> # You may use the command line option '-S' to verify your virtual host
> # configuration.
>
> #
> # Use name-based virtual hosting.
> #
> #NameVirtualHost *:80
>
> #
> # VirtualHost example:
> # Almost any Apache directive may go into a VirtualHost container.
> # The first VirtualHost section is used for requests without a known
> # server name.
> #
> #<VirtualHost *:80>
> # ServerAdmin webmaster@dummy-host.example.com
> # DocumentRoot /www/docs/dummy-host.example.com
> # ServerName dummy-host.example.com
> # ErrorLog logs/dummy-host.example.com-error_log
> # CustomLog logs/dummy-host.example.com-access_log common
> #</VirtualHost>
>
> LoadModule php4_module c:/php/sapi/php4apache.dll
> AddType application/x-httpd-php .php .phtml