Well, I am confused too. Maybe something with the Linksys Router (there
can be many options in the info provided in DHCP...), but I'm not
familiar whith this one.

I suggest that you post more info on your problem.
For example, the output of "ifconfig eth0" and "route" commands, when in
DHCP, and when trying to force the config, either with YaST or the
/etc/dhcp.conf.

Also, you can start "WINIPCFG" on your Win98 system, and write down the
output, so we can check what info the DHCP provides & if it is
consistent with what the Linux system receives.

Nicolas


A. Naim wrote:
> Nicolas <nicolas@somewhere.net> wrote in message news:<ccdcq1$8tj$1@apollon.grec.isp.9tel.net>...
>
>>A. Naim wrote:
>>
>>>Hello,
>>>
>>>I have just added a Linux (SuSE 9.1) machine to an existing home
>>>network with two Win98 computers. The router assigns IP addresses on a
>>>first-come-first-serve basis, so the IP of each machine depends on the
>>>boot order. However, while the Win98 machines "know their name", and
>>>are therefore always guaranteed to be identifiable by it, it seems
>>>that my linux machine gets its name from the DHCP server (the router),
>>>so occasionally it ends up with a host name that belongs to one of the
>>>Win98 machines (because the DCHP client table has that name against
>>>the IP that was allocated to the linux machine). This means that I get
>>>the same name assigned to two different machines at the same time.
>>>
>>>How do I convince my machine to have its own name? just typing
>>>"hostname linmachine" does not solve the problem, because I can only
>>>do this after logging in, and by then the host name was already
>>>acquired from the router. Can anyone advise?
>>
>>You can specify a host name in Suse 9.1 while keeping getting all other
>>"stuff" (IP, gateway, DNS...) from the DHCP Server.
>>
>>Just go to Yast, "Network Services", "DNS & Host Name", enter your
>>desired hostname.
>>Any field with no value will be queried from the DHCP server at boot time.
>>
>>Nicolas
>
>
>
> Hi,
>
> Thanks for the messages. I should apologise for any silly mistakes I
> make - I am new to this. However, having tried all of the methods
> suggested, the first thing that happened is that I lost internet
> connectivity, and have not managed to recover it whatever I do. This
> is what happened in detail:
>
> - static IP addresses: as soon as I fixed the addresses and disabled
> DHCP on the router I lost internet connectivity. Presumably this does
> not sit well with my ISP (or perhaps with the Linksys router) although
> these are LAN IPs and should not affect the dynamically-set IP of my
> router.I did supply the IP of the gateway in both Linux abd Win98
> machines, but this did not help. I had to go back to dynamic (DHCP)
> mode to regain internet access on the Win98 machines. The Linux one
> still has no internet access.
>
> - dhcpd.conf: I did not have such a file, but created it in /etc and
> typed in information as suggested in the sample file (thanks for
> that). Unfortunately, this did not do the trick and after rebooting I
> still have no internet access.
>
> - Using YaST I managed to rename my host. However, I have no internet
> access. Also, the topology of my LAN appears to have changed - for
> example, the linux machine can only access one of the Win98 machines
> if the other Win98 machine is up and running. It seems that it does
> not go through the router alone anymore, and I know that I did not
> change any routing data.
>
> I am a bit confused as to what went wrong. Perhaps there is a
> step-by-step guide somewhere starting from scratch? I will be grateful
> for any pointers.
>
> Thanks again,
>
> A. Naim